We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 80mm square case fan with 25mm thickness and four-pin PWM connector

Zyvpee

Zyvpee DBTA0825B2U P001 80mm PWM case fan

SKU CH-ED3B-HYGC5

An 80mm PWM case fan with ball bearing and 4-pin connector for 12V systems

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNo
  • FeaturesDC axial fan
  • PWM control matches fan speed to thermal load
  • 80 mm by 25 mm frame fits compact chassis
  • Ball bearing reduces friction for longer service life
  • 12 V 0.54 A four-pin connector enables precise regulation
  • DC axial design moves air efficiently through tight spaces

Compact 80 mm PWM case fan

The Zyvpee DBTA0825B2U P001 is an 80 mm square frame with a 25 mm thickness that fits standard 80 mm mounting points. It runs on a 12 V supply drawing 0.54 A through a four-pin PWM connector for automatic speed control. The ball-bearing motor and black plastic housing are designed for continuous operation inside a chassis. No LED lighting is fitted.

Suited to tight spaces needing speed control

Builders refreshing small-form-factor cases, rack-mount servers or legacy enclosures that only accept 80 mm fans will find the four-pin PWM interface useful for quiet low-speed running. Buyers who need higher static pressure for dense radiators or larger mounting holes should look elsewhere.

Four-pin PWM connector decides compatibility

The 4-pin header allows the motherboard or fan controller to modulate speed automatically; a three-pin header will run the fan at full voltage without regulation. Verify that your board provides a four-pin socket and that the 80 mm by 25 mm footprint clears surrounding components before purchase.

Highlights

  • PWM control matches fan speed to thermal load
  • 80 mm by 25 mm frame fits compact chassis
  • Ball bearing reduces friction for longer service life
  • 12 V 0.54 A four-pin connector enables precise regulation
  • DC axial design moves air efficiently through tight spaces

Specifications

Brand3ccooler.com
SeriesDBTA0825B2U P001
ModelDBTA0825B2U
TypeCase Fan
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNo
FeaturesDC axial fan
Dimensions80*25mm

Questions about this item

How loud does the 80 mm DBTA0825B2U P001 run when it spins continuously at 12 V?

The fan uses a ball bearing and 4-pin PWM control, so speed — and therefore noise — varies with the duty cycle set by the motherboard; at full 12 V / 0.54 A it moves the most air and produces the highest sound level.

What connector and voltage does the 4-pin PWM 8025 fan need from the system?

It requires a standard 4-pin PWM header supplying 12 V and capable of delivering at least 0.54 A.

Will the 80 * 25 mm frame fit the same mounting holes as my older 80 mm case fan?

Yes — the 80 mm square frame with 25 mm thickness matches the traditional 8025 mounting pattern used by older 8 cm fans.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.