We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 60mm square case fan 38mm thick four wire connector

Zyvpee

Zyvpee DBPG0638B2U 6038 12V 1.94A 4 Wires Thinksystem SR590 01KR062 case fan

SKU CH-6H2R-TN1ZF

60 mm ball-bearing case fan with 4-wire PWM control for Thinksystem SR590 servers

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector4 Wires
  • ColorBlack
  • LEDNo
  • Dimensions60*38mm
  • Ball-bearing reliability for continuous server operation
  • 12 V 1.94 A four-wire PWM control for precise speed regulation
  • 60 × 38 mm form factor fits ThinkSystem SR590 01KR062 chassis
  • AVC DBPG0638B2U P017 design validated for server thermal loads
  • New condition ensures full performance from first install

60 mm server fan for Thinksystem SR590

This 60 mm case fan is built for the Thinksystem SR590 server platform and uses a four-wire power connector. It suits technicians who need a direct replacement for the original cooling module. Buyers looking for RGB lighting or larger-diameter fans should choose a different product.

Ball-bearing thermals and 12 V 1.94 A draw

The ball bearing design supports continuous operation at 12 V with a 1.94 A current rating. Four-wire control allows the system to regulate speed for balanced airflow and acoustic output. No LED illumination is present, keeping the focus on thermal performance.

Fits 60 × 38 mm mounting pattern

The unit measures 60 by 38 mm and matches the mounting holes used in the SR590 chassis. The four-wire connector plugs directly into the server fan header without adapters. Builders needing a different form factor or voltage must select an alternative model.

Highlights

  • Ball-bearing reliability for continuous server operation
  • 12 V 1.94 A four-wire PWM control for precise speed regulation
  • 60 × 38 mm form factor fits ThinkSystem SR590 01KR062 chassis
  • AVC DBPG0638B2U P017 design validated for server thermal loads
  • New condition ensures full performance from first install

Specifications

Brand3ccooler.com
SeriesDBPG0638B2U P017
ModelDBPG0638B2U
TypeCase Fan
Bearing TypeBall
Power Connector4 Wires
ColorBlack
LEDNo
Dimensions60*38mm

Questions about this item

How do I install this 60 mm 4-wire fan into a Thinksystem SR590 and which step is often missed?

Align the four mounting holes with the chassis brackets, secure all four screws evenly, then connect the 4-wire PWM header to the motherboard; the step most often missed is plugging the fourth wire into the correct PWM socket so speed control works.

What maintenance will this ball-bearing 12 V 1.94 A fan need later?

Ball bearings are sealed, so no lubrication is required; simply blow dust from the blades and heatsink fins every few months to keep airflow at the rated 60 mm by 38 mm profile.

What limit appears first when this 6038 model runs continuously at full 12 V load?

The 1.94 A current draw sets the thermal ceiling; sustained maximum speed will hit the motor’s current limit before any voltage or connector restriction becomes active.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.