We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 4-pin PWM CPU cooler fan with ball bearing

Zyvpee

Zyvpee DAPA0815B2UP 004 12V 0.6A 4Pin PWM CPU Fan

SKU CH-ADC9-E8BMP

A 12 V, 0.6 A PWM case fan with a 4-pin connector and ball bearing for CPU or notebook cooling

  • TypeCPU Cooler Fan
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Fan
  • PWM control matches speed to thermal load using 4-pin connector
  • Ball bearing reduces friction for longer operating life
  • 12 V 0.6 A input delivers 4-wire regulated cooling
  • Non-LED black frame suits professional or stealth builds
  • Designed as CPU cooler fan for VGA and notebook thermal management

Compact 4-pin PWM cooler fan

The Zyvpee DAPA0815B2UP is a 12 V, 0.6 A CPU cooler fan with a four-wire PWM connector. It uses a ball bearing for reliable rotation and runs without any LED lighting. The black frame suits system builders who want a straightforward replacement or upgrade for a notebook or small-form-factor VGA cooler.

Replaces three-wire or worn ball-bearing units

Moving from a three-wire fan to this four-wire PWM model gives the motherboard direct speed control, cutting noise when the system is idle. The jump is worth it when the original fan has developed bearing rattle or can no longer spin fast enough under load. Builders keeping a legacy three-wire header gain no PWM benefit, so the upgrade only pays off on a true four-pin header.

Verify connector, voltage and mounting holes

Confirm the board header is a standard four-pin PWM type and supplies 12 V. Check that the screw-hole spacing matches the 815 pattern shown in the photos before ordering. The fan draws 0.6 A, so ensure the header or controller can deliver that current. Buyers needing addressable lighting, a different voltage or a larger frame should look elsewhere.

Highlights

  • PWM control matches speed to thermal load using 4-pin connector
  • Ball bearing reduces friction for longer operating life
  • 12 V 0.6 A input delivers 4-wire regulated cooling
  • Non-LED black frame suits professional or stealth builds
  • Designed as CPU cooler fan for VGA and notebook thermal management

Specifications

Brand3ccooler.com
SeriesDAPA0815B2UP
ModelDAPA0815B2UP
TypeCPU Cooler Fan
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan

Questions about this item

What size mounting holes does the DAPA0815B2UP 004 fan require?

The fan uses the 815 series frame dimensions for standard mounting hole spacing.

How do I connect the 4-pin PWM connector correctly?

Align the keyed 4-pin plug with the motherboard CPU fan header and press straight down until seated.

When should the ball bearing in this fan be replaced?

Ball bearings typically last years; replace the fan if noise increases or rotation becomes uneven.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.