We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 70mm square case fan 20mm thick non LED 3 pin

Zyvpee

Zyvpee DA07020R12H -S09 70mm 12V 0.33A 3 Pin case fan

SKU CH-BSYA-E6NG1

A 70mm ball-bearing case fan running at 12V 0.33A with a 3-pin connector for CPU cooling

  • TypeCPU Cooler Fan
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Cooling
  • Ball bearing for reliable long-term operation
  • 12 V 0.33 A power draw keeps energy use low
  • 70 mm by 20 mm frame fits tight chassis spaces
  • Three-pin connector enables motherboard speed control
  • Designed as a drop-in cooler for M610 and M425 systems

70mm 12V 3-pin CPU cooler fan

The Zyvpee DA07020R12H -S09 is a 70 by 20 millimetre case fan built for CPU cooling. It runs on 12 volts and draws zero point three three amps through a three-pin power connector. The black frame uses a ball bearing and carries no LED lighting. It is intended for builders replacing a worn or noisy 70mm cooler in compact systems.

Replaces 70mm three-pin coolers in M610 M425 units

This model fits the M610 and M425 platforms where a 7020 form-factor fan is specified. The upgrade is worthwhile when the original fan has failed, become loud or no longer spins at full speed. Ball-bearing construction aims to extend service life compared with sleeve-bearing alternatives. Buyers needing a different voltage, connector or frame thickness should look elsewhere.

Verify 70 by 20mm clearance and three-pin header

Measure the mounting holes and overall height to confirm the 70 by 20 millimetre footprint matches your heatsink or chassis cut-out. Ensure the motherboard or fan controller provides a three-pin DC header; this fan does not support PWM speed control. Check that 12 volt, zero point three three amp draw is within the header’s current limit before ordering.

Highlights

  • Ball bearing for reliable long-term operation
  • 12 V 0.33 A power draw keeps energy use low
  • 70 mm by 20 mm frame fits tight chassis spaces
  • Three-pin connector enables motherboard speed control
  • Designed as a drop-in cooler for M610 and M425 systems

Specifications

Brand3ccooler.com
SeriesDA07020R12H -S09
ModelDA07020R12H
TypeCPU Cooler Fan
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions70*20mm

Questions about this item

Will the 70 mm by 20 mm frame fit my M610 or M425 chassis?

The fan measures 70 mm square by 20 mm thick, matching the mounting pattern used in M610 and M425 systems.

How do I connect the three-pin plug without reversing the polarity?

Align the keyed three-pin connector with the motherboard header so the missing pin lines up; forcing it backwards bends pins.

When should I plan to replace the ball-bearing fan?

Ball bearings typically run for years; replace the unit when noise increases or airflow drops noticeably.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.