Zyvpee
Zyvpee D08K-12TS1 04(AX) 80x80x25mm 12V 0.16A 3 Pin case fan
80 mm square case fan with dual ball bearings and a 3‑pin 12 V 0.16 A connector
- TypeCase Fan
- CompatibilityCase
- Bearing Type2 Ball
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- 80 mm square frame fits tight spaces
- 25 mm thickness matches standard 80 mm mounts
- 12 V 0.16 A draws minimal power
- 3 pin connector enables speed monitoring
- dual ball bearing extends operating life
Zyvpee 80mm 2‑Ball Case Fan
The Zyvpee D08K-12TS1 is an 80 by 80 by 25 millimetre case fan built with a two‑ball bearing for durable operation. It runs on 12 volts at 0.16 amps and connects via a standard three‑pin power header. The black, non‑LED frame suits general chassis cooling or projector replacements.
Suits direct 3‑pin voltage control.
This unit suits builders who need a compact 80mm fan with a three‑pin connector for voltage‑based speed control. It does not suit systems that require four‑pin PWM regulation or mounting holes spaced for larger frame sizes.
80x80x25mm mounting footprint
The critical specification is the 80 by 80 by 25 millimetre frame, which dictates whether the fan fits the intended chassis or projector slot. Verify that your device provides matching screw holes and a three‑pin header before purchase.
Highlights
- 80 mm square frame fits tight spaces
- 25 mm thickness matches standard 80 mm mounts
- 12 V 0.16 A draws minimal power
- 3 pin connector enables speed monitoring
- dual ball bearing extends operating life
Specifications
| Series | D08K-12TS1 |
|---|---|
| Model | D08K-12TS1 |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | 2 Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 80*80*25mm |
Questions about this item
What voltage does the 3-pin connector supply to this 80 mm fan?
The 3-pin connector supplies 12 V to the D08K-12TS1, drawing 0.16 A.
Will the 80x80x25 mm frame fit my case's 80 mm mounting holes?
Yes, the 80 mm square frame and 25 mm thickness match standard 80 mm case mounts.
How do I connect the three wires without reversing polarity?
Match the three wires to the motherboard header: ground, 12 V, and tachometer signal.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114354BTC
In stock
