Zyvpee
Zyvpee C5010B12MV 50mm 5010 12V 0.15A 3 Pin case fan
A 50 mm ball-bearing case fan drawing 0.15 A at 12 V with a three-pin connector for CPU cooling
- TypeCPU Cooler Fan
- Bearing TypeBall
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- FeaturesCPU Cooling
- Compact 50 mm frame fits tight builds
- Ball bearing ensures long running life
- 12 V 0.15 A draws minimal power
- Three pin connector enables speed monitoring
- Non LED black design suits any case
Compact 50 mm CPU cooler fan
The Zyvpee C5010B12MV is a 50 mm square frame fan with a 10 mm thickness designed for targeted CPU cooling. It operates on a 12 V supply drawing 0.15 A through a three-pin power connector. The black, non-LED housing uses a ball bearing for durable rotation.
Replaces worn 5010 units in tight spaces
This model fits the standard 5010 footprint, making it a direct swap for failed or noisy fans of the same dimensions. The jump is worth it when the original bearing has degraded or when a three-pin header is required for motherboard speed reporting.
Mounts in 50*10 mm cut-outs with three-pin headers
Installation requires a 50 mm by 10 mm mounting aperture and an available three-pin fan header on the board or controller. The slim profile frees up clearance around dense heatsink fins or low-profile coolers where taller fans cannot fit.
Highlights
- Compact 50 mm frame fits tight builds
- Ball bearing ensures long running life
- 12 V 0.15 A draws minimal power
- Three pin connector enables speed monitoring
- Non LED black design suits any case
Specifications
| Brand | 3ccooler.com |
|---|---|
| Series | C5010B12MV |
| Model | C5010B12MV |
| Type | CPU Cooler Fan |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Cooling |
| Dimensions | 50*10mm |
Questions about this item
What are the exact dimensions and mounting hole spacing of the Zyvpee C5010B12MV 50mm fan?
The fan measures 50 mm square by 10 mm thick. Mounting holes follow the standard 50 mm fan pattern.
How do I connect the 3-pin power connector to my motherboard or controller?
Align the three wires — 12 V, ground, and tachometer — with the corresponding header pins and press straight on; forcing it sideways bends pins.
When should I plan to replace the ball bearing in this 12 V 0.15 A fan?
Ball bearings typically run for years; replace the fan if noise increases or rotation becomes uneven.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114537BTC
In stock
