Zyvpee
Zyvpee BNTA1025B2H 100*25mm DC12V .66A 3-wire Centrifugal Fan
A 100 by 25 millimetre centrifugal fan with ball bearing runs on 12 volts DC at .66 amps through a three-wire connector
- TypeCentrifugal fan
- CompatibilityCase
- Fan Size100mm
- Bearing TypeBall
- Power Connector3 Wires
- ColorBlack
- Centrifugal airflow suits tight case spaces with 100×25 mm frame
- Ball bearing reduces friction for longer service life
- 12 V DC at 0.66 A draws minimal power from supply
- Three-wire connector enables speed monitoring and control
- 49×48×49 mm mounting pitch fits standard purifier cut-outs
Compact Centrifugal Air Mover
The Zyvpee BNTA1025B2H is a 100mm centrifugal fan designed for case integration in appliances such as car purifiers. It moves air through a circular housing using a ball bearing for consistent rotation.
Verify Voltage and Connector Match
Confirm that your device supplies 12V DC and can deliver 0.66A to the three-wire lead. The pitch measures 49 by 48 by 49mm, so check the mounting holes align before ordering.
Fits Tight Internal Spaces
The 25mm thickness allows installation in shallow compartments where axial fans cannot sit. The three-pin connection supports speed monitoring, freeing the controller from guesswork.
Highlights
- Centrifugal airflow suits tight case spaces with 100×25 mm frame
- Ball bearing reduces friction for longer service life
- 12 V DC at 0.66 A draws minimal power from supply
- Three-wire connector enables speed monitoring and control
- 49×48×49 mm mounting pitch fits standard purifier cut-outs
Specifications
| Series | BNTA1025B2H |
|---|---|
| Model | BNTA1025B2H |
| Type | Centrifugal fan |
| Compatibility | Case |
| Fan Size | 100mm |
| Bearing Type | Ball |
| Power Connector | 3 Wires |
| Color | Black |
| LED | Non-LED |
| Features | Circular fan |
| Dimensions | 100*25mm |
Questions about this item
What comes in the box with the BNTA1025B2H centrifugal fan?
The box contains the BNTA1025B2H centrifugal fan unit itself. No mounting screws, power cables, or adapters are included.
Should I choose the 100mm or 10mm size for my car purifier?
The fan housing is 100mm wide and 25mm thick; the 10mm figure refers to the blade diameter. Select the BNTA1025B2H if your purifier needs a 100mm square housing.
What does the 0.66A rating mean when the fan runs in a 12V car purifier?
At 12V the fan draws 0.66A, consuming roughly 8 watts. The ball bearing and 3-wire connector support speed monitoring and PWM control in that environment.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
