Zyvpee
Zyvpee BM6025-04W-B59 TAM 60x25mm 3-pin blower case fan
A 60 mm by 25 mm blower-style case fan with a 3-pin connector and ball bearing
- TypeCase Fan
- Bearing TypeBall
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- FeaturesBlower
- 60 mm blower design targets tight spaces
- Ball bearing ensures durable continuous operation
- 12 V 0.32 A draw keeps power use low
- Three-pin connector fits standard motherboard headers
- Non-LED black finish suits stealth builds
Compact blower for tight builds
This Zyvpee BM6025-04W-B59 TAM is a 60 by 25 millimetre blower-style case fan designed for small-form-factor chassis or heatsinks that need directed airflow. It runs on a 12 volt DC supply drawing 0.32 amperes and connects via a standard three-pin power header. The ball-bearing motor and non-LED black frame suit industrial or embedded projects where space is at a premium.
Sustained airflow in confined spaces
The blower wheel pushes air through a narrow exhaust rather than scattering it, so static pressure remains steady when the fan feeds a dense fin stack or a restricted duct. Ball bearings maintain consistent speed during continuous operation without the wear patterns seen in sleeve designs. Because the unit draws only 0.32 amperes at 12 volts, thermal load on the motherboard header stays low even during extended duty cycles.
Verify header and clearance before fitting
Confirm your board or controller provides a three-pin 12 volt header; the fan has no PWM wire so speed control is voltage-based only. Measure the mounting area to ensure a 60 by 25 millimetre footprint and enough depth for the blower housing. Check that the exhaust direction matches your duct or heatsink inlet, as the housing cannot be reoriented after installation.
Highlights
- 60 mm blower design targets tight spaces
- Ball bearing ensures durable continuous operation
- 12 V 0.32 A draw keeps power use low
- Three-pin connector fits standard motherboard headers
- Non-LED black finish suits stealth builds
Specifications
| Brand | Zyvpee |
|---|---|
| Series | BM6025-04W-B59 TAM |
| Model | BM6025-04W-B59 |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | Blower |
| Dimensions | 60*25MM |
Questions about this item
How much heat and power will the 12 V, 0.32 A blower fan add when it runs continuously?
The blower draws 0.32 A at 12 V, so its steady power draw is low and the 60 mm by 25 mm frame keeps operating noise modest for all-day use.
What motherboard header do I need to connect the 3-pin power connector on this blower fan?
A standard 3-pin fan header on the motherboard or a 3-pin fan controller will power the BM6025-04W-B59 directly.
Will the 60 mm by 25 mm blower fit in the same mounting holes as my older 60 mm axial fan?
The 60 mm square frame matches legacy 60 mm mounting patterns, but the blower outlet orientation differs from axial fans, so check case clearance before swapping.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114708BTC
In stock
