We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 97x97x33mm blower fan with three-wire connector

Zyvpee

Zyvpee BG0903-B044-00S 97x97x33mm 12V 1.34A 3-wire blower fan

SKU CH-KW0H-PAWKN

A 97 × 97 × 33 mm 12 V 1.34 A blower fan with dual-ball bearings and a three-wire connector for Dell PowerEdge PE1500SC servers

  • TypeCPU Cooler Fan
  • Bearing Type2 Ball
  • Power Connector3 wires
  • ColorBlack
  • LEDNon-LED
  • FeaturesDC Blower
  • 12 V 1.34 A blower delivers targeted airflow for dense server chassis
  • 2-ball bearing design reduces friction for longer continuous operation
  • 97 × 97 × 33 mm footprint fits Dell PowerEdge PE1500SC bays directly
  • Three-wire connector enables speed monitoring without extra wiring
  • NMB 9733 series construction rated for industrial duty cycles

Zyvpee 97x97x33mm 12V blower fan

This 12V DC blower measures 97 by 97 by 33mm and draws 1.34A through a three-wire connector. It uses a 2 Ball bearing for durable operation and carries the NMB 9733 series designation. The black non-LED housing fits tight server chassis where axial airflow is limited.

Suits Dell PowerEdge PE1500SC maintenance

Technicians servicing a PowerEdge PE1500SC can use this as a direct replacement blower. Builders working on custom desktop towers or modern rack units should look elsewhere because the mounting pattern and airflow direction are specific to that legacy server platform.

10cm blower capacity for focused cooling

The 10cm blower wheel pushes air through a concentrated outlet, handling CPU cooler duties in the original server chassis. It runs out of headroom when static pressure demands exceed the 1.34A design envelope or when a larger form factor is required.

Highlights

  • 12 V 1.34 A blower delivers targeted airflow for dense server chassis
  • 2-ball bearing design reduces friction for longer continuous operation
  • 97 × 97 × 33 mm footprint fits Dell PowerEdge PE1500SC bays directly
  • Three-wire connector enables speed monitoring without extra wiring
  • NMB 9733 series construction rated for industrial duty cycles

Specifications

SeriesBG0903-B044-00S
ModelBG0903-B044-00S
TypeCPU Cooler Fan
Bearing Type2 Ball
Power Connector3 wires
ColorBlack
LEDNon-LED
FeaturesDC Blower
Dimensions97*97*33mm

Questions about this item

Does my Dell PowerEdge PE1500SC server already have the correct 3-wire header for this 12V 1.34A blower fan?

Yes, the fan uses a standard 3-wire power connector that matches the headers on the Dell PowerEdge PE1500SC it was designed for.

Will the 97x97x33mm dimensions of this NMB 9733 blower fit the same mounting points as the original fan in my PE1500SC?

The 97mm square frame and 33mm thickness match the OEM specifications for the PowerEdge PE1500SC, so it aligns with the existing screw holes.

How can I confirm the 2-ball bearing blower is spinning correctly after I install it in the server?

The server BIOS or hardware monitoring utility will report the fan RPM; a steady reading above zero confirms the 12V 1.34A motor is operating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.