We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 160mm blower fan with 38mm depth and 3-pin connector

Zyvpee

Zyvpee BFB1612H 160mm 38mm 12V 2.15A 3-pin blower case fan

SKU CH-5KNE-PXXHX

A 160 mm by 38 mm blower fan with dual ball bearings runs on 12 V and draws 2.15 A through a three-pin connector

  • TypeCase Fan
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • ColorBlack
  • LEDNo
  • Dimensions160*38mm
  • High airflow from 160 mm blower design
  • Dual-ball bearings extend operational lifespan
  • 12 V 2.15 A rating delivers strong static pressure
  • 38 mm thickness fits standard 16038 mounting holes
  • Three-pin connector enables basic speed monitoring

160 mm blower fan for tight chassis

This 160 mm by 38 mm blower moves air through a focused exhaust path, making it suited to rackmount servers, compact workstations or any build where a conventional axial fan cannot vent directly. The 3-pin connector provides simple voltage control on standard motherboard headers.

Dual-ball bearing and 2.15 A draw

A 2-ball bearing assembly reduces friction and extends service life in continuous-operation environments. At 12 V the fan draws 2.15 A, so the header or fan controller must supply sufficient current; the 3-wire layout reports speed without PWM regulation.

Replaces noisy sleeve-bearing blowers

The unit upgrades older 16038 blowers that use sleeve bearings and have begun to rattle or lose airflow. The step up is justified when the chassis cannot accommodate a larger diameter fan and the 38 mm thickness matches the existing mounting holes.

Highlights

  • High airflow from 160 mm blower design
  • Dual-ball bearings extend operational lifespan
  • 12 V 2.15 A rating delivers strong static pressure
  • 38 mm thickness fits standard 16038 mounting holes
  • Three-pin connector enables basic speed monitoring

Specifications

Brand3ccooler.com
SeriesBFB1612H
ModelBFB1612H
TypeCase Fan
Bearing Type2 Ball
Power Connector3 Pin
ColorBlack
LEDNo
Dimensions160*38mm

Questions about this item

What voltage and current does the 3-pin connector on the BFB1612H draw?

The fan runs on 12 V and draws 2.15 A through its 3-pin power connector.

Will the 160 mm by 38 mm frame fit my chassis mounting points?

It needs a 160 mm square cut-out with 38 mm depth clearance; verify your case has matching screw holes.

How do I wire the three leads correctly so the tachometer works?

Connect yellow to the motherboard tach pin, red to 12 V, black to ground; reversing red and black will prevent the fan from spinning.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.