Zyvpee
Zyvpee BFB1212VH 12032 12V 1.88A 3 Wires Blower Case Fan
120 mm centrifugal blower fan with 32 mm thickness, 12 V 1.88 A three-wire ball-bearing motor for focused airflow in tight cases
- TypeCase Fan
- Bearing TypeBall
- Power Connector3 Wires
- ColorBlack
- LEDNo
- Dimensions120*32mm
- Centrifugal blower design directs focused airflow through tight spaces
- 120 mm by 32 mm frame fits standard 120 mm mounting points
- Ball bearing construction reduces friction for longer service life
- 12 V 1.88 A rating delivers strong static pressure
- Three-wire connector enables speed monitoring via motherboard header
120 × 32 mm blower fan
The Zyvpee BFB1212VH is a 120 mm centrifugal blower designed to push air through restricted channels. It runs on 12 V and draws 1.88 A through a three-wire power connector. Ball bearings support the rotor for continuous operation.
Suited for tight ducting, not open chassis
Builders who need focused airflow through narrow heatsinks or rack ducts will benefit from the blower layout. Systems that rely on wide, low-pressure intake fans should look at something else because this design concentrates flow rather than dispersing it.
32 mm frame depth decides fit
The 32 mm thickness determines whether the fan seats in your chassis or bracket. Measure the available clearance before ordering, as slimmer or deeper bays will not accept this frame.
Highlights
- Centrifugal blower design directs focused airflow through tight spaces
- 120 mm by 32 mm frame fits standard 120 mm mounting points
- Ball bearing construction reduces friction for longer service life
- 12 V 1.88 A rating delivers strong static pressure
- Three-wire connector enables speed monitoring via motherboard header
Specifications
| Brand | 3ccooler.com |
|---|---|
| Series | BFB1212VH -F00 |
| Model | BFB1212VH |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 3 Wires |
| Color | Black |
| LED | No |
| Dimensions | 120*32mm |
Questions about this item
How does the ball bearing hold up when the 12032 blower runs continuously at 12 V and 1.88 A?
The ball bearing is built for long-term operation and resists wear better than sleeve designs under constant load.
What noise and heat should I expect from the 120 mm × 32 mm blower running all day at 12 V 1.88 A?
With no LED and a simple three-wire supply, the unit draws a steady 1.88 A; heat output matches that power draw and acoustic level is typical for a ball-bearing centrifugal blower of this size.
My motherboard only has a 4-pin PWM header — will the three-wire connector on this 12032 blower work without an adapter?
The fan uses a standard three-wire power connector and will run at full speed on a 12 V header; a 4-pin header accepts it but speed control will not be available.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114223BTC
In stock
