We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 120mm square case fan, 32mm thick, ball bearing, three-wire connector

Zyvpee

Zyvpee BFB1212H -F00 120mm 12032 case fan

SKU CH-VW93-M9ZSQ

A 120 mm ball-bearing case fan with a 3-wire 12 V connector, 1.23 A draw and 32 mm thickness for server cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Wires
  • ColorBlack
  • LEDNon-LED
  • FeaturesServer Cooling
  • 120 mm frame fits standard case mounts
  • 32 mm thick profile moves more air through dense meshes
  • ball bearing runs quieter and lasts longer than sleeve types
  • 3‑wire connector reports speed to the motherboard
  • 12 V 1.23 A draw keeps power use low

120 mm 32 mm ball-bearing fan

The Zyvpee BFB1212H -F00 is a 120 mm by 32 mm case fan built with a ball bearing for continuous operation. It runs on 12 V DC and draws 1.23 A through a three-wire power connector. The black frame carries no LED lighting.

Server cooling and constant-duty builds

This fan suits servers, workstations or any chassis that needs steady airflow at a fixed 12 V supply. It does not suit builders who need PWM speed control, a thinner profile or integrated lighting.

Three-wire 12 V 1.23 A power connector

The three-wire connector delivers a constant 12 V at 1.23 A with no PWM signal. Verify that your motherboard or fan controller provides a matching three-pin header and can supply the rated current before fitting this unit.

Highlights

  • 120 mm frame fits standard case mounts
  • 32 mm thick profile moves more air through dense meshes
  • ball bearing runs quieter and lasts longer than sleeve types
  • 3‑wire connector reports speed to the motherboard
  • 12 V 1.23 A draw keeps power use low

Specifications

Brand3ccooler.com
SeriesBFB1212H -F00
ModelBFB1212H
TypeCase Fan
Bearing TypeBall
Power Connector3 Wires
ColorBlack
LEDNon-LED
FeaturesServer Cooling
Dimensions120*32mm

Questions about this item

What screw-hole spacing does the 120 mm frame use for mounting?

The 120 mm square frame follows the standard 120 mm mounting pattern, so four screws align with the case or radiator holes.

How do the three wires connect to a motherboard or fan controller?

Connect the three-wire plug to a 3-pin or 4-pin DC header; the third wire reports speed while voltage controls RPM.

When should the ball-bearing assembly be replaced?

Ball bearings typically run for years; replace the fan if noise increases or airflow drops noticeably.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.