We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 120 by 32 millimetre centrifugal blower fan with four-pin connector

Zyvpee

Zyvpee BFB1212EH 120x32mm 4-pin blower case fan

SKU CH-0KGT-D4WKV

A 120 mm by 32 mm centrifugal blower with dual ball bearings and a 4-pin connector for server-style airflow

  • TypeCase Fan
  • Bearing Type2 Ball
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesServer Blower
  • High airflow for tight builds with 120 mm × 32 mm blower design
  • Reliable long-term operation using dual ball bearing construction
  • Precise speed control via 4-pin PWM connector
  • Focused cooling for dense layouts with turbine centrifugal fan
  • Stable 12 V power delivery rated at 2.85 A current draw

Zyvpee 120x32mm Blower Fan

The Zyvpee BFB1212EH is a 120mm by 32mm centrifugal blower designed for server and workstation chassis. It runs on 12 V DC at 2.85 A and uses a four-pin power connector for PWM control. The black frame houses a dual-ball bearing turbine that moves air across a concentrated path rather than a wide cone. This unit is sold new and carries no LED lighting.

Suited for directed airflow builds

Builders who need focused exhaust through a restricted duct or heatsink will match this blower’s pressure profile. Systems that rely on wide-area case circulation should look elsewhere, as the centrifugal design does not replace a standard axial fan. Buyers who require RGB illumination or silent operation at low RPM will not find those features here. The 32 mm thickness also limits fitment in slim enclosures.

Simple four-pin installation

The fan mounts with standard 120 mm screw holes and plugs directly into any motherboard or fan controller header that supplies 12 V on a four-pin connector. PWM speed control works without extra wiring. The most common issue is forgetting that the thicker 32 mm frame can block adjacent drive cages or PCIe slots in tight layouts. Verify clearance before ordering.

Highlights

  • High airflow for tight builds with 120 mm × 32 mm blower design
  • Reliable long-term operation using dual ball bearing construction
  • Precise speed control via 4-pin PWM connector
  • Focused cooling for dense layouts with turbine centrifugal fan
  • Stable 12 V power delivery rated at 2.85 A current draw

Specifications

Brand3ccooler.com
SeriesBFB1212EH -9C1B
ModelBFB1212EH
TypeCase Fan
Bearing Type2 Ball
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesServer Blower
Dimensions120*32mm

Questions about this item

Does my case have room for a 120 mm by 32 mm blower fan and a standard 4-pin PWM header on the motherboard?

The fan measures 120 mm square and 32 mm thick, so verify your chassis has that clearance; it draws power from a regular 4-pin header supplying 12 V.

Will the 2.85 A draw of this blower exceed what an older motherboard fan header can supply?

Most legacy headers are rated for 1 A, so this unit’s 2.85 A requirement is likely too high; use a dedicated high-current header or a fan controller instead.

How can I confirm the turbine centrifugal fan is spinning correctly after installation?

Enter the BIOS or fan-control software and check that the reported RPM rises smoothly from idle to full speed without stalling or unusual noise.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.