We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 100 mm centrifugal blower fan with 3-pin power connector

Zyvpee

Zyvpee BFB1012VH 97*33mm 12V 2.7A 3-pin blower case fan

SKU CH-B1W3-SVSSR

A 100 mm centrifugal blower fan with dual ball bearings, 12 V 2.7 A draw and a 3-pin connector for focused case airflow

  • TypeCase Fan
  • CompatibilityCase
  • Fan Size100mm
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • ColorBlack
  • Delta 97x33mm blower design moves air through tight case spaces
  • 12V 2.7A three-pin power delivers strong static pressure for dense heatsinks
  • Dual ball bearing construction extends operating life under continuous load
  • Non-LED black frame keeps builds clean without light bleed
  • 100mm centrifugal form factor fits standard 10cm mounting points

Compact centrifugal blower for tight chassis

The Zyvpee BFB1012VH is a 100 mm DC blower designed to exhaust heat directly out of a small-form-factor case. Its 97 mm by 33 mm frame fits narrow ducting where conventional axial fans cannot mount. Dual ball bearings support continuous 12 V operation at 2.7 A.

Three-pin power lead with speed reporting

The 3-wire connector supplies 12 V DC and returns a tachometer signal so the motherboard can monitor fan speed. No PWM wire is present, so voltage control is the only way to vary RPM. The non-LED black housing adds no light spill inside the chassis.

Verify 100 mm blower mounting points and 12 V header

Measure the cut-out to confirm the 97 mm square footprint aligns with your case or heatsink shroud. Ensure the board provides a 12 V three-pin header rated for at least 2.7 A. Builders needing PWM control or larger airflow paths should consider alternative cooling designs.

Highlights

  • Delta 97x33mm blower design moves air through tight case spaces
  • 12V 2.7A three-pin power delivers strong static pressure for dense heatsinks
  • Dual ball bearing construction extends operating life under continuous load
  • Non-LED black frame keeps builds clean without light bleed
  • 100mm centrifugal form factor fits standard 10cm mounting points

Specifications

SeriesBFB1012VH
ModelBFB1012VH
TypeCase Fan
CompatibilityCase
Fan Size100mm
Bearing Type2 Ball
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC Blower

Questions about this item

Will the 2-ball bearing in this 100 mm blower need periodic lubrication or replacement?

The dual ball bearing is sealed for life and rated for continuous operation; no user lubrication is required and the fan is designed to run until the motor itself wears out.

What thermal or current limit is reached first when the BFB1012VH runs at 12 V and 2.7 A continuously?

At the rated 2.7 A draw the motor hits its thermal ceiling first; the windings are designed to stabilise at that current without tripping any over-current protection.

How loud and hot does the 97×33 mm centrifugal blower get during all-day operation?

The blower produces a consistent mid-range airflow noise and the housing becomes warm to the touch, both staying within the normal envelope for a 12 V DC centrifugal design.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.