Zyvpee
Zyvpee BFB0512HHA 50x10mm 12V 0.24A 3-pin blower case fan
50 mm centrifugal blower fan with 3-pin connector runs on 12 V at 0.24 A for targeted component cooling
- TypeCPU Cooler Fan
- CompatibilityCPU Cooler
- Bearing TypeBall
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Compact 50×10 mm blower fits tight CPU coolers
- Ball bearing ensures long service life
- 12 V 0.24 A draws minimal power
- Three-pin connector enables speed monitoring
- Centrifugal design directs airflow through heatsink fins
Compact blower for tight cooler slots
The Zyvpee BFB0512HHA is a 50 × 50 × 10 mm centrifugal fan built for CPU coolers that require focused airflow through narrow fin stacks. It runs on 12 V at 0.24 A and connects via a standard three-pin power header. Ball-bearing construction and a non-LED black frame suit continuous operation in space-constrained builds.
Replaces noisy or worn 5010 blowers
Swap this unit in when an original 5010 blower develops bearing rattle or fails to spin up at low voltage. The 12 V / 0.24 A rating matches many legacy cooler designs, so the upgrade is worthwhile when the existing fan no longer clears heat from dense fin arrays. Keep the original if it still moves air quietly at full speed.
Fits 50 mm cooler cutouts with three-pin headers
Mount the fan directly into 50 mm square openings on compatible heatsinks; the 10 mm thickness leaves minimal clearance for adjacent components. A three-pin connector supplies power and tachometer feedback to the motherboard or fan controller. No RGB lighting or PWM control is included, so speed varies with voltage only.
Highlights
- Compact 50×10 mm blower fits tight CPU coolers
- Ball bearing ensures long service life
- 12 V 0.24 A draws minimal power
- Three-pin connector enables speed monitoring
- Centrifugal design directs airflow through heatsink fins
Specifications
| Series | BFB0512HHA |
|---|---|
| Model | BFB0512HHA |
| Type | CPU Cooler Fan |
| Compatibility | CPU Cooler |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC Blower |
| Dimensions | 50*50*10mm |
Questions about this item
What are the exact mounting hole dimensions for the 50*50*10mm frame?
The blower measures 50 mm by 50 mm with a 10 mm thickness, matching the standard 5010 mounting pattern used on many CPU coolers.
How do I connect the 3-pin connector so the tachometer signal works?
Align the three wires — power, ground, and sense — with the motherboard header; the keyed plug prevents reverse insertion, but forcing it sideways bends pins and kills the RPM signal.
When should I plan to replace the ball-bearing blower?
Ball bearings typically run for years at 12 V 0.24 A, but if the fan develops a growl or speed drops below spec, swap it out to keep the cooler effective.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115165BTC
In stock
