We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 60 by 18 mm blower fan with three pins

Zyvpee

Zyvpee BD126018MB 60x18mm 12V .2A 3-pin case fan

SKU CH-NMFF-VCXSJ

A 60x18mm ball-bearing case fan that runs on 12V 0.2A through a 3-pin connector

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 60 x 18 mm frame fits tight projector housings
  • Ball-bearing motor reduces friction for longer service life
  • 12 V .2 A draw keeps power demand low
  • Three-pin connector enables simple motherboard or controller hookup
  • Non-LED black design avoids light bleed in dark environments

Compact 60 x 18 mm blower for tight builds

The Zyvpee BD126018MB is a 12 V, 0.2 A case fan with a 60 x 18 mm frame and a three-pin power connector. Its ball bearing and DC blower design target airflow through narrow channels such as projector housings or small-form-factor CPU coolers. The black, non-LED housing keeps the appearance neutral for internal mounting.

Ball bearing maintains steady airflow under

The ball bearing reduces friction compared with sleeve alternatives, allowing the blower to sustain its rated speed during long operating periods without the slowdown that heat buildup can cause. The 12 V, 0.2 A draw remains constant, so thermal performance stays predictable in enclosed projector or mini-PC chassis where airflow paths are restricted.

Replaces 60 mm sleeve-bearing blowers in projector

Builders swapping a worn 60 x 18 mm sleeve fan gain longer service life and consistent static pressure from the ball bearing. The upgrade is worthwhile when the original fan has become noisy or fails to move enough air through dense heatsink fins; it is not suited for builds needing larger frame sizes, PWM control or RGB lighting.

Highlights

  • Compact 60 x 18 mm frame fits tight projector housings
  • Ball-bearing motor reduces friction for longer service life
  • 12 V .2 A draw keeps power demand low
  • Three-pin connector enables simple motherboard or controller hookup
  • Non-LED black design avoids light bleed in dark environments

Specifications

BrandZyvpee
SeriesBD126018MB
ModelBD126018MB
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
Featuresdc blower
Dimensions60*18mm
Package Contentsrefer to title

Questions about this item

How loud is the Zyvpee BD126018MB when it runs continuously at 12 V and .2 A?

The fan uses a ball bearing and a 3-pin DC blower design rated for 12 V and .2 A, so it produces a steady airflow hum without PWM ramping.

What must my system already provide for the 3-pin connector on this 60×18 mm fan?

A standard three-pin 12 V header on the motherboard or a compatible fan controller supplies both power and a tachometer signal.

Will the 60 mm BD126018MB fit the mounting holes on my older CPU cooler that uses 60 mm fans?

Its 60×18 mm frame matches the common 60 mm square pattern, so it bolts directly onto most legacy coolers drilled for that spacing.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.