We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black blower-style case fan, 3-pin connector

Zyvpee

Zyvpee BD125015HB 12V .21A 3 Pin Blower Case Fan

SKU CH-H4CZ-YH16R

A 12 V, 0.21 A centrifugal blower with ball bearing and 3-pin connector for projector cooling

  • TypeCase Fan
  • CompatibilityProjector fan
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Blower design directs airflow through tight projector channels
  • Ball bearing reduces friction for longer service life
  • 12 V .21 A draws minimal power from supply
  • 3 pin connector enables motherboard speed control
  • Non LED black frame keeps builds discreet

Compact Blower for Projector Cooling

This 12 V centrifugal blower draws .21 A and connects through a standard 3 pin header, making it a direct replacement for projector and printer cooling assemblies. It targets technicians and hobbyists who need a drop-in part for tight ducting rather than a standard case fan.

Ball Bearing Thermals and Low Power Draw

The ball bearing motor runs on 12 V at .21 A, keeping power consumption modest while delivering focused airflow through a blower housing. Noise stays predictable under continuous operation and the DC design avoids the voltage spikes seen in some PWM alternatives.

Black Non-LED Build with 3 Pin Simplicity

A black plastic frame carries no lighting, so it suits professional equipment where visual distraction is unwanted. The three wire connector supplies power and tachometer feedback without PWM control, meaning speed is managed by voltage regulation or a manual controller rather than motherboard curves. Buyers who want PWM speed curves or RGB illumination should look elsewhere.

Highlights

  • Blower design directs airflow through tight projector channels
  • Ball bearing reduces friction for longer service life
  • 12 V .21 A draws minimal power from supply
  • 3 pin connector enables motherboard speed control
  • Non LED black frame keeps builds discreet

Specifications

SeriesBD125015HB
ModelBD125015HB
TypeCase Fan
CompatibilityProjector fan
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC Blower

Questions about this item

How do I install the Zyvpee BD125015HB 3-pin blower fan and what step is often missed?

Connect the 3-pin power connector to a matching motherboard or controller header, then secure the blower housing with screws; the step often missed is verifying the airflow direction matches the projector or printer ducting so the centrifugal exhaust points outward.

What maintenance or replacement will the Zyvpee BD125015HB ball-bearing blower need later?

The ball-bearing motor is rated for long life, but dust buildup on the centrifugal impeller reduces static pressure; clean the blower wheel with compressed air annually and replace the unit if bearing noise appears or airflow drops noticeably.

What limit appears first on the Zyvpee BD125015HB 12V 0.21A blower during sustained use?

The fixed 12V 0.21A input caps maximum speed and static pressure; under continuous load the blower hits its thermal and aerodynamic ceiling, so airflow cannot increase beyond the design point even if the system demands more cooling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.