We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black square 30mm DC blower fan 10mm thick two-wire connector

Zyvpee

Zyvpee B0503AFB2-8 30mm 10mm DC 5V .65W case fan

SKU CH-HB07-X22ER

30 mm DC 5 V ball-bearing blower fan with 2-wire connector, 10 mm thick

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Fan Size30mm
  • Bearing TypeBall
  • Power Connector2 wires
  • ColorBlack
  • Compact 30 mm frame fits tight notebook bays
  • Ball bearing ensures long-life, quiet operation
  • Low 0.65 W draw keeps system power budget low
  • DC blower design pushes air through narrow heatsinks
  • Simple 2-wire, 2-pin connector enables quick installation

Compact DC blower for tight spaces

This 30 mm square fan measures 10 mm thick and runs on 5 V DC power. It draws 0.65 W through a two-wire lead ending in a two-pin connector. The ball-bearing motor drives a centrifugal blower wheel in a black frame with no lighting.

Suits notebook or projector repairs needing a 3 cm

Builders replacing a CPU cooler fan of the same footprint and voltage will find a direct fit. Systems that require PWM speed control, a three- or four-pin header, or higher airflow than a 0.65 W blower delivers should look elsewhere.

Critical spec: 30 mm by 10 mm form factor

The physical envelope determines whether the fan seats in the target heatsink or chassis cut-out. Verify the exact mounting hole spacing and connector orientation before ordering, as no adapter or alternate lead length is included.

Highlights

  • Compact 30 mm frame fits tight notebook bays
  • Ball bearing ensures long-life, quiet operation
  • Low 0.65 W draw keeps system power budget low
  • DC blower design pushes air through narrow heatsinks
  • Simple 2-wire, 2-pin connector enables quick installation

Specifications

SeriesB0503AFB2-8
ModelB0503AFB2-8
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Fan Size30mm
Bearing TypeBall
Power Connector2 wires
ColorBlack
LEDNon-LED
FeaturesDC Blower
Dimensions30*30*10mm

Questions about this item

How do I install the 30mm B0503AFB2-8 fan and what step is often missed?

Mount the 30*30*10mm frame with the two pins aligned to the 5V header; the step people miss is confirming the blower outlet faces the heatsink fins, not away from them.

What maintenance will the ball bearing in this 0.65W fan need later?

The ball bearing is sealed and requires no lubrication; if noise or vibration appears after long use, replace the entire 30mm unit rather than servicing the bearing.

What limit appears first when the 5V turbofan runs continuously in a projector or notebook?

Sustained operation at 0.65W typically hits the thermal limit of the tiny 30mm frame first, causing the ball bearing to wear faster than at intermittent duty cycles.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.