We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Zyvpee

Zyvpee AFB1212HHE R00 12V 0.7A 3 Pin 120x38mm case fan

SKU CH-EWP0-62FN8

A 12 V 0.7 A 3-pin case fan with dual-ball bearings measuring 120 x 38 mm

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • High airflow from 120 mm by 38 mm frame
  • Dual ball bearing extends operational lifespan
  • 12 V 0.7 A draw keeps power use low
  • Three-pin connector fits standard motherboard headers
  • Non-LED black design suits any build aesthetic

High-Airflow 120 mm Case Fan

The Zyvpee AFB1212HHE R00 is a 120 mm square frame case fan built for high-static-pressure cooling. It runs on 12 V DC drawing 0.7 A through a three-pin power connector. The 38 mm thick housing uses a dual-ball bearing for durable operation in demanding thermal environments.

Suited for dense heatsink or radiator mounts

Builders fitting thick radiators or dense fin stacks benefit from the 38 mm depth and strong pressure curve. Systems limited to slimmer fan profiles or requiring four-pin PWM speed control cannot use this unit. The non-LED black frame keeps the appearance neutral inside any chassis.

38 mm thickness decides fit

The single specification that determines compatibility is the 38 mm frame depth. Verify that your case, radiator or heatsink mounting holes accept this dimension before purchase. The three-pin connector provides voltage-based speed regulation without PWM signalling.

Highlights

  • High airflow from 120 mm by 38 mm frame
  • Dual ball bearing extends operational lifespan
  • 12 V 0.7 A draw keeps power use low
  • Three-pin connector fits standard motherboard headers
  • Non-LED black design suits any build aesthetic

Specifications

SeriesAFB1212HHE
ModelAFB1212HHE
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions120mm*120mm*38mm

Questions about this item

How loud does the AFB1212HHE get when it runs continuously at 12 V?

The fan uses a 2-ball bearing and draws 0.7 A at 12 V, so expect a steady mechanical hum with noticeable airflow noise after hours of non-stop operation.

What must the case or controller provide for this 120 mm × 38 mm fan to spin?

A standard three-pin 12 V header capable of supplying at least 0.7 A, plus 120 mm mounting holes spaced for a 38 mm thick frame.

Does the AFB1212HHE include any speed-control or RGB wiring beyond the three pins?

No — the connector carries only power, ground and tachometer signals, so speed must be managed by voltage regulation on the motherboard or fan controller.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.