We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 60 by 15 millimetre case fan with four-pin connector

Zyvpee

Zyvpee AFB0612VHC 60*15mm 4 Pin Case Fan

SKU CH-88CD-G2NSH

A 60 × 15 mm, 12 V, 0.36 A ball-bearing case fan with a 4-pin PWM connector for CPU-cooler mounting

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • 12 V 0.36 A PWM control for precise speed adjustment
  • 60 × 15 mm compact frame fits tight CPU coolers
  • Ball bearing design extends operational lifespan
  • Four-pin connector enables motherboard fan regulation
  • Non-LED black finish suits stealth builds

Compact 60 mm CPU cooler fan

The Zyvpee AFB0612VHC is a 60*15 mm case fan built for CPU cooler mounting. It runs on 12 V at 0.36 A through a 4 pin connector and uses a ball bearing. The black, non-LED frame suits builders who need a small, standard PWM fan for tight cooler clearance.

Straightforward 4 pin installation

The four wire plug fits any standard PWM header on the motherboard or fan controller. Ball bearing construction reduces the risk of sleeve wear but can produce a faint mechanical hum at low speeds. No special tools or adapters are required beyond the supplied screws.

Steady airflow under continuous load

At constant 12 V the fan maintains its rated current draw without thermal throttling. Ball bearings handle sustained rotation better than sleeve types, so airflow stays consistent during long rendering or compile sessions. Acoustic output remains stable rather than rising as the bearing warms.

Highlights

  • 12 V 0.36 A PWM control for precise speed adjustment
  • 60 × 15 mm compact frame fits tight CPU coolers
  • Ball bearing design extends operational lifespan
  • Four-pin connector enables motherboard fan regulation
  • Non-LED black finish suits stealth builds

Specifications

BrandZyvpee
SeriesAFB0612VHC
ModelAFB0612VHC
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions60*15mm

Questions about this item

How can I confirm the 4-pin AFB0612VHC is spinning at the correct speed after installation?

Connect the 4-pin header to the motherboard and monitor the RPM reading in BIOS or fan-control software; the PWM signal will report the actual speed so you can verify it matches the 12 V 0.36 A rating.

What comes with the 60*15 mm AFB0612VHC and what must I purchase separately?

The box contains only the 4-wire ball-bearing fan; mounting screws, fan filters, splitter cables or a fan controller are not included and must be bought separately.

Which version of the AFB0612VHC should I choose for a 60 mm CPU cooler slot?

Select the AFB0612VHC model rated 12 V 0.36 A with a 4-pin PWM connector; it is the only variant listed for the 60*15 mm form factor.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.