Zyvpee
Zyvpee AFB0424SHB R00 40mm 24V 0.18A 3 Pin case fan
40 mm ball-bearing case fan runs on 24 V and draws 0.18 A through a three-pin connector
- TypeCase Fan
- Bearing TypeBall
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- FeaturesInverter Cooling Fan
- Ball bearing ensures long-life operation
- 40x15mm frame fits tight 40mm mounts
- 24V 0.18A draws minimal inverter power
- Three-wire connector enables speed monitoring
- Non-LED black design keeps builds stealthy
40 mm Inverter Cooling Fan
The Zyvpee AFB0424SHB R00 is a 40 mm by 15 mm case fan built for inverter cooling. It runs on 24 V DC and draws 0.18 A through a three-pin power connector. Ball bearings support continuous operation in compact enclosures.
24 V 0.18 A Three-Pin Power Requirement
This fan requires a 24 V DC supply capable of delivering 0.18 A on a standard three-pin header. Verify that your inverter or controller provides exactly that voltage and connector before purchase. A mismatched voltage or two-pin header will prevent operation.
Ball Bearing and Non-LED Design
The ball bearing reduces friction for longer service life in high-temperature inverter environments. No LEDs are fitted, so the fan adds no light output to the chassis. Photographs show the exact physical unit you will receive.
Highlights
- Ball bearing ensures long-life operation
- 40x15mm frame fits tight 40mm mounts
- 24V 0.18A draws minimal inverter power
- Three-wire connector enables speed monitoring
- Non-LED black design keeps builds stealthy
Specifications
| Brand | 3ccooler.com |
|---|---|
| Series | AFB0424SHB R00 |
| Model | AFB0424SHB |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | Inverter Cooling Fan |
| Dimensions | 40*15mm |
Questions about this item
How much current does the 24 V fan actually draw once installed?
The fan is rated at 0.18 A on a 24 V supply, so it will pull roughly that current when running.
What does the three-pin connector provide on this model?
The 3-pin plug delivers power and a tachometer signal for speed monitoring, but no PWM control.
Will the 40 mm by 15 mm frame fit my mounting points?
The housing measures 40 mm square and 15 mm thick, matching standard 4015 mounting holes.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
