We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 105mm square case fan 38mm thick three-wire non-LED

Zyvpee

Zyvpee AD1012DB-F93 -9B11 105mm 38mm 3-Wire Case Fan

SKU CH-TMZN-6TWCE

A 105 mm ball-bearing case fan with a 3-wire 12 V connection for focused system cooling

  • TypeCase Fan
  • Fan Size108mm
  • Bearing TypeBall
  • Power Connector3 Wires
  • ColorBlack
  • LEDNon-LED
  • 105 mm frame fits tight chassis spaces
  • 38 mm thickness moves more air per revolution
  • Ball bearing reduces friction for longer service life
  • Three-wire connector enables speed monitoring
  • 12 V 0.21 A draws minimal power from the supply

Precise 105 × 38 mm footprint

This Zyvpee case fan measures 105 millimetres square by 38 millimetres thick. It fits chassis and radiator mounts that call for the 10538 form factor. Builders working with tight clearances or non-standard mounting holes should verify hole spacing before ordering.

DC 12 V 0.21 A three-wire power

The motor draws 0.21 amps at twelve volts and terminates in a three-wire connector. That connector supplies power and a tachometer signal but no PWM control. Systems that require four-pin PWM headers will not be able to regulate speed through the motherboard.

Straightforward screw mounting

Four corner holes accept standard case screws for a secure fit. The three-wire lead reaches most motherboard headers without extension cables. Misalignment of the mounting holes is the most common installation issue, so measure the chassis pattern first.

Highlights

  • 105 mm frame fits tight chassis spaces
  • 38 mm thickness moves more air per revolution
  • Ball bearing reduces friction for longer service life
  • Three-wire connector enables speed monitoring
  • 12 V 0.21 A draws minimal power from the supply

Specifications

Brand3ccooler.com
SeriesAD1012DB-F93 -9B11
ModelAD1012DB-F93
TypeCase Fan
Fan Size108mm
Bearing TypeBall
Power Connector3 Wires
ColorBlack
LEDNon-LED
FeaturesPower Cooling
Dimensions105*38mm

Questions about this item

What does the 0.21 A draw mean for my power supply?

The fan pulls 0.21 A from a 12 V rail, so it adds very little load to any standard PSU.

What does the three-wire connector actually control?

The three wires carry power, ground and a tachometer signal so the motherboard can monitor fan speed.

Will the 105 mm by 38 mm frame fit my case mounts?

The fan measures 105 mm square and 38 mm thick, matching standard 105 mm mounting holes.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.