We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 80mm square axial case fan 25mm thick with 2-pin connector

Zyvpee

Zyvpee AD0812UB-A73GL 80×25mm 12V .45A 2-pin case fan

SKU CH-FWJZ-041F5

An 80 × 25 mm DC axial fan with ball bearing, 12 V .45 A draw and 2-pin power

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Ball-bearing motor for long service life
  • 12 V .45 A draw keeps power use low
  • 80 mm square frame fits standard 80×25 mm mounts
  • Two-pin connector plugs straight into motherboard headers
  • Axial airflow design cools cases without LED distraction

80 mm DC axial case fan

This Zyvpee AD0812UB-A73GL is an 80 mm square, 25 mm thick axial cooler designed for standard case mounting points. It runs on 12 V DC and draws 0.45 A through a two-pin power connector. The black frame houses a ball-bearing motor and carries no LED lighting.

Ball-bearing motor on two-pin power

The single specification that determines fit is the 2-pin DC connector, which provides constant 12 V power without PWM speed control. Ball bearings give longer life than sleeve types at the same voltage and current. No other mounting or electrical variants are offered for this model.

Suits basic chassis airflow, not PWM builds

Builders who need a simple exhaust or intake fan for an 80 mm slot and who are happy with fixed-speed operation will find this unit adequate. Buyers who want motherboard-controlled fan curves, RGB illumination or a thinner profile should look at something else.

Highlights

  • Ball-bearing motor for long service life
  • 12 V .45 A draw keeps power use low
  • 80 mm square frame fits standard 80×25 mm mounts
  • Two-pin connector plugs straight into motherboard headers
  • Axial airflow design cools cases without LED distraction

Specifications

SeriesAD0812UB-A73GL
ModelAD0812UB-A73GL
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions80*80*25mm

Questions about this item

How much current will the 12 V fan draw in my case?

The AD0812UB-A73GL draws 0.45 A at 12 V, so a standard motherboard header rated for 1 A can run two of them in parallel.

What does the 2-pin connector limit compared with a 3- or 4-pin header?

A 2-pin connector supplies power only; the motherboard cannot monitor RPM or vary voltage for speed control.

Will the 80×25 mm frame fit my chassis fan slots?

The fan measures 80 mm square and 25 mm thick, matching the common 80 mm mounting pattern used in many cases.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.