We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 80 by 32 millimetre case fan with two wires

Zyvpee

Zyvpee AD0812MB-Y51 80x32mm 12V 0.24A 2-Wire Case Fan

SKU CH-2SH4-22S62

An 80×32 mm 12 V case fan with dual-ball bearings and a two-wire power connection for server cooling

  • TypeCase Fan
  • Bearing Type2 Ball
  • Power Connector2 Wires
  • ColorBlack
  • LEDNon-LED
  • FeaturesPower Cooling
  • Dual-ball bearing extends service life
  • 12 V 0.24 A draws minimal power
  • 80×32 mm frame fits tight bays
  • Two-wire connector simplifies installation
  • Non-LED black design keeps builds clean

Compact 80x32mm server fan

The Zyvpee AD0812MB-Y51 is an 80mm case fan built for tight server and workstation chassis. Its two-ball bearing and 12V 0.24A rating deliver reliable airflow where larger coolers cannot fit. Non-LED black housing keeps the install discreet for professional environments.

Replaces worn 8032 two-wire units

This model directly substitutes legacy 80x32mm fans that use a simple two-wire power connector. The jump is worthwhile when the original bearing has become noisy or airflow has dropped below spec. It is not for builders who need PWM speed control or three- and four-pin headers.

Simple two-wire installation

Connect the two leads to a matching 12V header or molex adapter and secure the 80mm frame with standard screws. Polarity must be observed because the connector lacks a keyed shroud. The main risk is reversing the wires, which will prevent the fan from spinning.

Highlights

  • Dual-ball bearing extends service life
  • 12 V 0.24 A draws minimal power
  • 80×32 mm frame fits tight bays
  • Two-wire connector simplifies installation
  • Non-LED black design keeps builds clean

Specifications

Brand3ccooler.com
SeriesAD0812MB-Y51
ModelAD0812MB-Y51
TypeCase Fan
Bearing Type2 Ball
Power Connector2 Wires
ColorBlack
LEDNon-LED
FeaturesPower Cooling
Dimensions80*32mm

Questions about this item

Will the 80x32mm frame with 12V 0.24A rating fit my server chassis?

The fan measures 80mm by 32mm and draws 0.24A at 12V, so verify your chassis has an 80mm mounting grid and a 12V header rated for at least 0.24A.

How do I connect the two-wire lead without reversing polarity?

Match the red wire to the 12V pin and the black wire to ground on the motherboard or fan controller; the connector is not keyed, so double-check orientation before powering on.

When should I plan to replace the 2 Ball bearing in the AD0812MB-Y51?

The dual ball bearing is rated for long life; expect replacement only if noise increases or rotation becomes uneven after extended continuous operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.