Zyvpee
Zyvpee AD0812MB-D90 80x15mm 12V 0.20A 2 Pin Case Fan
An 80 mm case fan spinning at 1600-1999 RPM with a barometric bearing, 12 V 0.20 A two-pin power and a 20-25 dBA noise level
- TypeCase Fan
- CompatibilityCase
- Bearing TypeBarometric
- RPM1600-1999 RPM
- Noise Level20 - 25 dBA
- Power Connector2 Pin
- Quiet operation at 20-25 dBA for low-noise builds
- 12 V, 0.20 A draw keeps power use minimal
- 80 x 15 mm frame fits standard 80 mm mounts
- Barometric bearing supports 1600-1999 RPM airflow
- Simple 2-pin connector enables quick installation
Compact 80 mm case fan for tight builds
The Zyvpee AD0812MB-D90 is an 80 by 15 mm case fan designed for small-form-factor chassis or CPU coolers that require a slim profile. It runs on 12 V and draws 0.20 A through a two-pin power connector. The non-LED black frame keeps the look neutral for any build.
Barometric bearing runs at 1600 to 1999 RPM
The barometric bearing supports a speed range of 1600 to 1999 RPM while keeping acoustic output between 20 and 25 dBA in normal operation. Power draw stays low at 0.20 A on the 12 V rail. This makes the fan suitable for quiet systems where thermal headroom is modest.
Two-pin connector limits speed control to voltage
The two-pin power connector means fan speed can only be adjusted by varying voltage, not by PWM signalling. Builders who need automatic temperature curves tied to a four-pin header should note this limitation. The 80 by 15 mm mounting pattern fits standard 80 mm screw holes on cases and heatsinks.
Highlights
- Quiet operation at 20-25 dBA for low-noise builds
- 12 V, 0.20 A draw keeps power use minimal
- 80 x 15 mm frame fits standard 80 mm mounts
- Barometric bearing supports 1600-1999 RPM airflow
- Simple 2-pin connector enables quick installation
Specifications
| Brand | Zyvpee |
|---|---|
| Series | AD0812MB-D90 |
| Model | AD0812MB-D90 |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Barometric |
| RPM | 1600-1999 RPM |
| Noise Level | 20 - 25 dBA |
| Power Connector | 2 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Fan |
| Dimensions | 80*15mm |
Questions about this item
How do I connect the 2-pin connector on the AD0812MB-D90 to my motherboard?
Align the two pins with the corresponding header on the board and press firmly; the connector is not keyed, so reversing it will stop the fan from spinning.
When should I plan to replace the barometric bearing in this 80x15mm fan?
The barometric bearing is sealed for the life of the unit; if noise rises above the rated 20-25 dBA or speed drops below 1600 RPM, replace the whole fan.
What thermal limit appears first when the AD0812MB-D90 runs continuously at 1999 RPM?
Sustained operation at the top of the 1600-1999 RPM range increases bearing wear and noise, so the acoustic limit of 25 dBA is typically reached before any thermal shutdown.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
