Innovation First, Inc.
Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
$72.99
0.0008642BTC
In stock
Zyvpee
Zyvpee AD0812HB-C71GP 80x20mm 12V .34A 2-wire case fan
An 80 mm case fan with 20 mm depth, 12 V and .34 A draw, using a 2-ball bearing and two-wire power
- TypeCase Fan
- CompatibilityCase
- Bearing Type2 Ball
- Power Connector2 wires
- ColorBlack
- LEDNon-LED
- 80 mm square frame fits standard mounting points
- 20 mm thickness suits slim chassis
- Dual-ball bearing extends operating life
- 12 V 0.34 A draw keeps power low
- Two-wire connector simplifies installation
Compact 80 mm Case Fan
The Zyvpee AD0812HB-C71GP is an 80 by 20 millimetre DC axial fan built for case ventilation. It runs on 12 volts and draws 0.34 amps through a two-wire power connector. The black frame houses a dual-ball bearing for reliable rotation.
Suited for tight 80 mm mounts
This unit fits builders who need a standard 80 mm replacement or intake fan with a two-wire connection. It is not for systems that require a three- or four-wire header for speed reporting or PWM control, nor for cases that only accept larger frame sizes.
Two-wire 12 V power connector
The connector type decides whether the fan can be plugged directly into the available header. Verify that the motherboard or controller provides a two-pin 12 volt socket before purchase.
Highlights
- 80 mm square frame fits standard mounting points
- 20 mm thickness suits slim chassis
- Dual-ball bearing extends operating life
- 12 V 0.34 A draw keeps power low
- Two-wire connector simplifies installation
Specifications
| Series | AD0812HB-C71GP |
|---|---|
| Model | AD0812HB-C71GP |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | 2 Ball |
| Power Connector | 2 wires |
| Color | Black |
| LED | Non-LED |
| Features | DC axial fan |
| Dimensions | 80*80*20mm |
Questions about this item
What clearance does the 80x20mm frame need inside the case?
The fan measures 80 mm square by 20 mm thick, so allow at least that much space behind the mounting panel and around the edges.
How do you connect the two wires to a motherboard or fan controller?
The two-wire lead carries 12 V at 0.34 A; match the red wire to positive and the black wire to ground on a standard 3- or 4-pin header, leaving the tach pin empty.
When should the 2 Ball bearing be inspected or replaced?
The dual ball bearing is rated for long life; listen for new rattles or a drop in airflow after several years of continuous use and replace the unit if noise appears.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Vertiv
Vertiv 4UTELECOMRKIT 19 in rack mount bracket accessory
- GXT4U Wall Mount Br…
- Mounting Bracket
$70.99
0.00084052BTC
In stock
