We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 80 mm square case fan with two-pin connector

Zyvpee

Zyvpee AD0812HB-A70GL 80 mm 2-ball 2-pin case fan

SKU CH-Z2KS-44RJV

An 80 mm two-ball-bearing case fan with a 2-pin power connector for DC 12 V cooling

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Dual ball bearing extends fan lifespan
  • 80 mm square frame fits standard case mounts
  • 12 V DC power with 0.25 A draw
  • Two-pin connector enables simple motherboard hookup
  • Non-LED black design suits stealth builds

Zyvpee 80 mm 2-ball case fan

The Zyvpee AD0812HB-A70GL is an 80 mm square frame fan built for standard case cooling. It runs on 12 V DC at 0.25 A and uses a 2-pin power connector. The black non-LED housing fits typical 80 mm mounting points in chassis or small-form-factor enclosures.

Upgrade from sleeve-bearing 80 mm fans

This model replaces older 80 mm sleeve-bearing units that develop noise or fail after extended use. The 2-ball bearing design handles higher operating temperatures and continuous duty cycles better. The jump is worth it when the existing fan rattles, slows under load or has exceeded its rated lifespan.

Straightforward 2-pin installation

Mounting uses four standard 80 mm screw holes and the 2-pin plug connects directly to a motherboard or controller header. Polarity must be observed because the connector lacks a keyed guide. The most common issue is reversed wires causing the fan to stay still or spin backwards.

Highlights

  • Dual ball bearing extends fan lifespan
  • 80 mm square frame fits standard case mounts
  • 12 V DC power with 0.25 A draw
  • Two-pin connector enables simple motherboard hookup
  • Non-LED black design suits stealth builds

Specifications

SeriesAD0812HB-A70GL
ModelAD0812HB-A70GL
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions80*80*25mm

Questions about this item

Will the 80 mm frame and 25 mm thickness fit my case fan mount?

The fan measures 80 by 80 by 25 mm, matching the standard 8025 mounting pattern used on most chassis.

How do I connect the 2-pin power connector, and what mistake should I avoid?

Plug the 2-pin header onto a 12 V DC fan header; the common error is reversing polarity because the connector is not keyed.

When will the 2-ball bearing need replacement?

The dual ball bearing design runs until audible noise or reduced airflow appears; no lubrication interval is required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.