Zyvpee
Zyvpee AD0612MX-A70GL 60×25mm 12V 0.14A 2-pin case fan
A 60 × 25 mm case fan with ball bearing, 12 V 0.14 A draw and a 2-pin connector for server or inverter cooling
- TypeCPU Cooler Fan
- Bearing TypeBall
- Power Connector2 Pin
- ColorBlack
- LEDNon-LED
- FeaturesCPU Fan
- Compact 60×25 mm frame fits tight chassis spaces
- Ball bearing ensures durable, reliable rotation
- 12 V, 0.14 A draw keeps power use low
- Two-pin connector simplifies motherboard installation
- Designed for server and inverter cooling duties
Zyvpee AD0612MX-A70GL 60×25mm fan
The Zyvpee AD0612MX-A70GL is a 60mm by 25mm case fan designed for compact server or inverter cooling. It runs on 12V DC power drawing 0.14A through a two-pin connector. The black frame houses a ball-bearing motor without any LED lighting. This unit suits tight chassis where a 6025 form factor is required.
Suits 12V two-pin headers; not for PWM headers
This fan fits systems with a 12V two-pin header and the physical space for a 60mm frame. It is not for builders who need four-pin PWM speed control or addressable lighting. Buyers requiring higher airflow than a 60mm frame can deliver should look at larger form factors. Verify the mounting holes match the AD0612MX-A70GL pattern before ordering.
60mm × 25mm ball-bearing 12V 0.14A spec
The deciding specification is the 60mm by 25mm frame combined with a 12V 0.14A two-pin ball-bearing motor. That exact size, voltage, current draw and connector type determine whether it fits the target chassis and header. Confirm the 6025 dimensions and two-wire interface against your board layout. No other single figure overrides this compatibility check.
Highlights
- Compact 60×25 mm frame fits tight chassis spaces
- Ball bearing ensures durable, reliable rotation
- 12 V, 0.14 A draw keeps power use low
- Two-pin connector simplifies motherboard installation
- Designed for server and inverter cooling duties
Specifications
| Brand | 3ccooler.com |
|---|---|
| Series | AD0612MX-A70GL |
| Model | AD0612MX-A70GL |
| Type | CPU Cooler Fan |
| Bearing Type | Ball |
| Power Connector | 2 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Fan |
| Dimensions | 60*25mm |
Questions about this item
Does this 60×25 mm fan need a 12 V two-pin header on the motherboard or fan controller?
Yes, the AD0612MX-A70GL draws 0.14 A from a standard 12 V two-pin power connector, so the board or controller must provide that header.
Will the ball-bearing AD0612MX-A70GL outlast a sleeve-bearing 60 mm fan I already use in the same chassis?
Ball bearings generally endure higher temperatures and continuous server duty better than sleeve bearings, so this fan should last longer under the same 12 V load.
How can I confirm the AD0612MX-A70GL is spinning correctly after I plug it in?
Check the BIOS or monitoring software for a stable RPM reading on the two-pin header and feel steady airflow from the 60 mm frame.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
