We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 60 by 20 mm case fan with two wires

Zyvpee

Zyvpee AD0612LS-C70GL 60x20mm 12V 0.08A 2-pin case fan

SKU CH-WDX9-45802

A 60×20 mm 12 V sleeve-bearing case fan with a 2-pin connector for CPU cooling

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing Typesleeve
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • 60 mm square footprint fits tight chassis spaces
  • 20 mm thickness clears low-profile CPU coolers
  • 12 V, 0.08 A draw keeps power load minimal
  • Two-pin connector plugs straight into standard headers
  • Sleeve bearing runs quietly for everyday cooling

Compact 60 mm case fan

The Zyvpee AD0612LS-C70GL is a 60 by 20 mm case fan designed for CPU coolers and tight chassis spaces. It runs on 12 V DC and draws 0.08 A through a standard 2-pin connector. The black frame carries no LED lighting. This unit suits builders who need a small replacement or supplementary airflow device.

Sleeve bearing thermals and acoustics

A sleeve bearing supports the rotor, keeping operational noise low at modest speeds. The 12 V 0.08 A rating translates to a low power draw that adds minimal heat to the system. In normal use the fan delivers steady airflow for 6 cm class coolers without demanding extra wiring or controller channels. It fits applications where a thin 20 mm profile is required.

Two-wire simplicity

The 2-pin power connector supplies voltage only, so speed is fixed unless an external voltage regulator is added. No PWM signal wire, RGB header or mounting screws are included in the package. Buyers who need variable speed control, addressable lighting or a bundled hardware kit should look elsewhere. The bare fan is ready for direct connection to a compatible header.

Highlights

  • 60 mm square footprint fits tight chassis spaces
  • 20 mm thickness clears low-profile CPU coolers
  • 12 V, 0.08 A draw keeps power load minimal
  • Two-pin connector plugs straight into standard headers
  • Sleeve bearing runs quietly for everyday cooling

Specifications

Brand3ccooler.com
SeriesAD0612LS-C70GL
ModelAD0612LS-C70GL
TypeCase Fan
CompatibilityCPU Cooler
Bearing Typesleeve
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions60*20mm

Questions about this item

How do I mount this 60×20 mm sleeve-bearing fan and which orientation mistake should I avoid?

Align the four corner holes with your chassis or heatsink brackets, use the supplied screws, and orient the label side as the intake so airflow moves toward the components; reversing it pulls hot air back over the CPU.

When will the sleeve bearing need replacement and what symptom appears first?

Expect a gradual rise in noise or a drop in RPM after extended running; when the fan becomes audibly rough or spins noticeably slower at 12 V, plan to swap it.

At 0.08 A on 12 V, what thermal limit appears first during continuous operation?

The 2 W power ceiling means the motor saturates before moving more air, so sustained loads hit an airflow plateau rather than a temperature trip.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.