We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small square 30mm turbo blower fan in two-tone finish with two-wire connector

Zyvpee

Zyvpee AB03005HX040100 30mm case fan

SKU CH-2B9A-WX89E

30 mm hydro-bearing blower fan runs on 5 V at 0.15 A with a two-wire connector

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Fan Size30mm
  • Bearing TypeHydro Bearing
  • Power Connector2 wires
  • Color2-Tone
  • Compact 30 mm turbo blower fits tight CPU coolers
  • Hydro bearing reduces friction for quieter long-term operation
  • 5 V 0.15 A draw keeps power demand minimal
  • Two-wire 2-pin connector simplifies motherboard hookup
  • Non-LED 2-tone design avoids light bleed in dark cases

Adda 30 mm turbo blower fan

The Zyvpee AB03005HX040100 is a 30 mm DC blower designed for CPU-cooler mounting. It runs on a 5 V, 0.15 A supply through a two-wire, two-pin connector and uses a hydrodynamic bearing. The 30*4 mm frame and non-LED, two-tone finish suit compact cooling builds.

Builders fitting tight CPU coolers

This fan suits integrators replacing a 30 mm blower on an existing heatsink where the original unit matches the 5 V, two-pin interface. It is not for cases needing larger frame sizes, PWM control, addressable lighting or higher static-pressure ratings than the supplied blower design delivers.

30*4 mm frame with two-pin 5 V power

The critical specification is the 30*4 mm mounting footprint combined with a two-wire, 5 V, 0.15 A power connector. Verify that the target heatsink accepts those exact dimensions and voltage before purchase.

Highlights

  • Compact 30 mm turbo blower fits tight CPU coolers
  • Hydro bearing reduces friction for quieter long-term operation
  • 5 V 0.15 A draw keeps power demand minimal
  • Two-wire 2-pin connector simplifies motherboard hookup
  • Non-LED 2-tone design avoids light bleed in dark cases

Specifications

SeriesAB03005HX040100
ModelAB03005HX040100
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Fan Size30mm
Bearing TypeHydro Bearing
Power Connector2 wires
Color2-Tone
LEDNon-LED
FeaturesDC Blower
Dimensions30*04mm

Questions about this item

What size mounting holes does the 30mm blower need?

The fan frame is 30 by 4 millimetres, so it fits a standard 30mm square mounting pattern with four screw holes.

How do I connect the two-wire lead without reversing polarity?

Match the red wire to the 5V pin and the black wire to ground on a 5V DC header; the blower will only spin in the correct direction when polarity is observed.

When should the hydro bearing be checked or the fan replaced?

Hydro bearings are sealed for life, so no lubrication is required; replace the blower only if airflow drops noticeably or noise increases after extended use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.