We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 92mm square axial case fan 32mm thick three-wire ball bearing

Zyvpee

Zyvpee 9G0912A204 9232 92x32mm 12V .58A 3-wire case fan

SKU CH-J7J3-V4Q7Z

A 92 mm square axial fan with ball bearing, 12 V .58 A draw and three-wire power for case cooling

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector3 Wires
  • ColorBlack
  • LEDNon-LED
  • Ball-bearing design reduces wear for longer service life
  • 12 V, 0.58 A power draw keeps energy use low
  • 92 × 92 × 32 mm frame fits standard 92 mm mounts
  • Three-wire connector enables speed monitoring by the motherboard
  • Non-LED black finish suits low-profile builds

Zyvpee 92 mm axial fan for case cooling

The Zyvpee 9G0912A204 is a 92 mm by 32 mm square-frame axial fan designed to move air through a computer case. It runs on a 12 V DC supply and draws 0.58 A through a three-wire power connector. The black, non-LED housing uses a ball bearing for rotation.

Replaces worn 92 mm three-wire fans

This unit fits the same 92 mm mounting pattern used by many chassis and heatsink designs that require a 32 mm thick frame. The three-wire connector supplies power and a tachometer signal for speed monitoring. The upgrade is worthwhile when the original fan has developed bearing noise, reduced airflow or has failed completely.

Ball bearing maintains steady speed under

The ball bearing construction resists the wear that causes sleeve bearings to slow down or rattle after long periods of operation. Because the motor draws a constant 0.58 A at 12 V, the rotational speed remains stable during extended gaming or rendering sessions. The square DC cooler frame keeps vibration low even when the fan runs uninterrupted for hours.

Highlights

  • Ball-bearing design reduces wear for longer service life
  • 12 V, 0.58 A power draw keeps energy use low
  • 92 × 92 × 32 mm frame fits standard 92 mm mounts
  • Three-wire connector enables speed monitoring by the motherboard
  • Non-LED black finish suits low-profile builds

Specifications

Series9G0912A204
Model9G0912A204
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector3 Wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions92*92*32mm

Questions about this item

Will the 92 mm square frame with 32 mm depth fit my case fan mounts?

The fan measures 92 mm by 92 mm and is 32 mm thick, so it fits standard 92 mm mounting holes with enough clearance for the deeper profile.

How do I connect the three-wire lead to my motherboard, and which wire is often missed?

Plug the 3-wire connector onto a 12 V DC fan header; the third wire is the tachometer signal that must be seated fully or the board will report zero RPM.

When should I expect to replace the ball-bearing fan?

Ball bearings typically run for tens of thousands of hours; plan a swap when noise rises or speed drops below the rated 0.58 A draw at 12 V.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.