We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 80 by 38 millimetre axial case fan with two wire lead

Zyvpee

Zyvpee 8214JN 80x38mm 24V 10.8W case fan

SKU CH-MRSJ-6BXKP

An 80 x 38 mm DC axial fan with ball bearing, running on 24 V at 10.8 W for case or inverter cooling

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector2 wires
  • ColorBlack
  • LEDNon-LED
  • Ball-bearing motor runs smoothly for long service life
  • 24 V DC input delivers 10.8 W of cooling power
  • Compact 80 mm square frame fits tight chassis spaces
  • 38 mm thickness provides high static pressure for restricted airflow
  • Two-wire power connector enables simple installation

Product identity

The Zyvpee 8214JN is a 80 by 38 millimetre DC axial case fan designed for 24 volt operation. It uses a ball bearing and a two wire power connector without LED lighting. The black frame suits standard case mounting points for targeted airflow.

Compatibility check

Verify that your chassis accepts an 80 by 38 millimetre fan and that the mounting holes align with the 80 millimetre spacing. Confirm the system provides a 24 volt DC source capable of delivering 10.8 watts for this unit. The two wire lead requires a matching header or adapter on your controller or power supply.

Thermals noise power

At 24 volts the fan draws 10.8 watts to move air through the axial impeller. Ball bearing construction typically produces a steady mechanical sound that remains consistent over time. The non LED design eliminates extra light output while the 38 millimetre thickness allows deeper blade geometry for pressure focused cooling.

Highlights

  • Ball-bearing motor runs smoothly for long service life
  • 24 V DC input delivers 10.8 W of cooling power
  • Compact 80 mm square frame fits tight chassis spaces
  • 38 mm thickness provides high static pressure for restricted airflow
  • Two-wire power connector enables simple installation

Specifications

Series8214JN
Model8214JN
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector2 wires
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions80*80*38mm

Questions about this item

Does the 8214JN arrive with mounting hardware or do I need to buy screws separately?

The fan ships as the bare unit only; standard 80 mm case screws are not included and must be sourced separately.

The listing shows a single 24 V 10.8 W version — is there any other voltage or power option to consider?

Only the 24 V 10.8 W model is offered; no alternative voltage or wattage variants exist for this series.

What does the 10.8 W rating mean for airflow and noise once the 8214JN is installed in a case?

At 10.8 W the fan delivers strong axial flow for inverter cooling while the ball bearing keeps running noise consistent over time.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.