We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black square 7015 CPU cooler fan with 3-pin connector

Zyvpee

Zyvpee 7015 C51 70x15mm 3-Pin CPU Cooler Fan

SKU CH-NK6J-1YYGM

70 mm by 15 mm ball-bearing CPU cooler fan with a 3-pin 12 V 0.32 A connector

  • TypeCPU Cooler Fan
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNo
  • FeaturesCPU Cooling
  • 70 mm square frame fits tight CPU cooler mounts
  • Ball bearing motor runs quietly for long service life
  • 12 V 0.32 A three-pin connector plugs straight into motherboard headers
  • 15 mm slim profile clears low-clearance heatsinks and cases
  • Black finish with no LED keeps builds clean and distraction-free

Zyvpee 7015 C51 70x15mm CPU Cooler Fan

The Zyvpee 7015 C51 is a 70x15mm square cooler fan designed for CPU cooling in compact systems. It uses a ball bearing for durable operation and connects via a standard 3-pin power connector. This new component suits builders replacing a failed fan on a compatible heatsink or small form factor chassis. It is not for buyers who need integrated RGB lighting or PWM speed control.

3-Pin 12V 0.32A Power Specification

The fan runs on 12V DC and draws 0.32A through its three-wire, three-pin connector. This electrical profile decides whether the part matches the header and voltage requirements of the target motherboard or controller. Verify the pinout and current capacity before purchase. The unit lacks a fourth PWM wire so it cannot support duty-cycle speed regulation.

Ball Bearing Thermals and Acoustics

Ball bearing construction provides consistent rotation and a long service life under continuous CPU cooling loads. The 70x15mm frame moves air through the heatsink fins at the rated voltage and current. No LED illumination is present, keeping power draw focused on airflow. Acoustic character will reflect the bearing type and mounting rigidity in the specific build.

Highlights

  • 70 mm square frame fits tight CPU cooler mounts
  • Ball bearing motor runs quietly for long service life
  • 12 V 0.32 A three-pin connector plugs straight into motherboard headers
  • 15 mm slim profile clears low-clearance heatsinks and cases
  • Black finish with no LED keeps builds clean and distraction-free

Specifications

BrandZyvpee
Series2806RL-04W-B59 C51
Model2806RL-04W-B59 C51
TypeCPU Cooler Fan
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNo
FeaturesCPU Cooling
Dimensions70*15MM

Questions about this item

How much power does the 12 V 0.32 A rating actually draw on a motherboard header?

The fan draws 0.32 A at 12 V, which is well within the current limit of a standard three-pin fan header.

What does the three-pin connector allow the board to control?

The three-pin connector supplies 12 V power, ground and a tachometer signal so the motherboard can monitor speed but cannot vary voltage for PWM control.

Will the 70 mm by 15 mm frame fit my CPU cooler mounting holes?

The square frame measures 70 mm per side and 15 mm thick; check your cooler’s fan mounting pattern for 70 mm hole spacing before installing.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.