We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 172 by 51 millimetre axial fan with aluminium frame and three wires

Zyvpee

Zyvpee 6224 NTDA 172x51mm DC24V 48W case fan

SKU CH-PHDA-B24N3

A 170 mm axial case fan with a 51 mm thick aluminium frame, dual-ball bearings and a three-wire 24 V 48 W motor

  • TypeCase Fan
  • CompatibilityCase
  • Fan Size170mm
  • Bearing Type2 Ball
  • Power Connector3 wires
  • ColorBlack
  • Dual-ball bearing extends service life
  • 24 V DC input simplifies power wiring
  • 48 W motor delivers strong airflow
  • 172 × 51 mm aluminium frame fits large cases
  • Three-wire connector enables speed monitoring

Zyvpee 6224 NTDA 172x51mm DC24V 48W case fan

The Zyvpee 6224 NTDA is a 170mm axial cooling fan built on an aluminium frame for 24V DC operation at 48W. It uses a two-ball bearing and a three-wire power connector for speed monitoring. The black, non-LED design suits industrial or server chassis that require high-airflow circular cooling.

Suited for 24V systems with 172mm mounting holes

This fan fits builders who have a 24V supply and the 172mm by 51mm footprint available in their enclosure. It is not for systems limited to lower-voltage headers or smaller mounting patterns. The three-wire lead also requires a header that can accept a tachometer signal.

24V 48W power rating

The 24V 48W rating is the single figure that decides compatibility; the chassis must deliver that voltage and current through a three-pin header. If the available power rail or connector differs, the fan will not operate correctly.

Highlights

  • Dual-ball bearing extends service life
  • 24 V DC input simplifies power wiring
  • 48 W motor delivers strong airflow
  • 172 × 51 mm aluminium frame fits large cases
  • Three-wire connector enables speed monitoring

Specifications

Series6224 NTDA
Model6224 NTDA
TypeCase Fan
CompatibilityCase
Fan Size170mm
Bearing Type2 Ball
Power Connector3 wires
ColorBlack
LEDNon-LED
FeaturesCircular cooling fan

Questions about this item

Will the 172 mm by 51 mm aluminium frame fit my 170 mm case fan slots?

The fan measures 172 mm square by 51 mm thick, so verify your chassis has at least that much clearance for the aluminium frame.

How do I connect the three wires to a 24 V DC supply without reversing polarity?

Match the three-wire lead to a 24 V DC header — typically yellow for 24 V, black for ground, and the third wire for tachometer signal.

When should I plan to replace the dual ball bearings in this 48 W axial fan?

Monitor for increased noise or vibration; dual ball bearings last many thousands of hours at 24 V, so replace when audible wear appears.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.