We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Zyvpee

Zyvpee 614NHHR 60x25mm 24V 125mA 2-wire case fan

SKU CH-18G5-BRKDK

A 60 mm DC axial case fan with ball bearing, 24 V power and two-wire connection

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector2 Wires
  • ColorBlack
  • LEDNon-LED
  • 60 mm square frame fits compact builds
  • 24 V 125 mA draw keeps power use low
  • Ball bearing design extends operating life
  • Two-wire power lead simplifies installation
  • Non-LED black finish suits stealthy aesthetics

Zyvpee 614NHHR 60 mm DC fan

This Zyvpee 614NHHR is a 60 by 25 mm axial case fan that runs on 24 V DC and draws 125 mA. It uses a two-wire power connection and a ball bearing for rotation. The frame is black and there is no LED lighting.

Suits 24 V chassis slots.

Builders who have a 24 V fan header or an external 24 V supply can connect this unit directly. It will not suit systems that only provide 12 V power or require a four-wire PWM control signal. Buyers who need variable speed control from a motherboard header should look elsewhere.

24 V 125 mA two-wire power specification

The fan operates at 24 volts with a 125 milliamp current draw through its two-wire lead. This electrical profile decides whether the cooler matches the available power source in the build.

Highlights

  • 60 mm square frame fits compact builds
  • 24 V 125 mA draw keeps power use low
  • Ball bearing design extends operating life
  • Two-wire power lead simplifies installation
  • Non-LED black finish suits stealthy aesthetics

Specifications

Series614NHHR
Model614NHHR
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector2 Wires
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions60*60*25mm

Questions about this item

How do I install the 614NHHR fan and which step is often missed?

Mount the 60x60x25mm frame with four screws, connect the two wires to a 24V DC source observing polarity, and verify the 125mA draw does not exceed the header limit.

What maintenance or replacement will the 614NHHR need over time?

The ball bearing is rated for long life; expect to replace the fan only when noise or vibration indicates bearing wear.

What limit appears first when the 614NHHR runs continuously at full load?

The 125mA current draw at 24V sets the thermal ceiling; sustained operation is limited by the bearing temperature rise within the 60x25mm frame.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.