We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 60x25mm axial case fan, two-wire 24V 3.6W

Zyvpee

Zyvpee 614NGHH 60x25mm 24V 3.6W 2-wire case fan

SKU CH-JHNJ-QYX8W

60×25 mm 24 V DC axial fan with ball bearing, 3.6 W, 4500–4999 RPM, 30–35 CFM airflow and 35–40 dBA noise

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • RPM4500-4999 RPM
  • Air Flow30-35 CFM
  • Noise Level35 - 40 dBA
  • Ball bearing rated for continuous operation at 4500-4999 RPM
  • 30-35 CFM airflow keeps components cool under load
  • 24 V 3.6 W input limits power draw
  • 60 x 25 mm frame fits standard 60 mm mounts
  • 35-40 dBA noise level suits quiet builds

Purpose-built 60 mm axial cooler

The Zyvpee 614NGHH is a 24 V DC axial fan designed for equipment enclosures and industrial chassis. It delivers 30 to 35 CFM at 4 500 to 4 999 RPM while producing 35 to 40 dBA of noise. The two-wire power connection suits fixed-speed cooling circuits.

Suits constant-voltage cooling loops

Engineers maintaining 24 V rail systems with 3.6 W headroom will find the ball-bearing motor a direct fit for 60 x 25 mm mounting holes. Builds that require PWM control, lower voltage rails or higher static pressure should look at alternative designs.

Fixed 24 V two-wire power input

The single specification that decides fit is the 24 V two-wire connector; the fan has no tachometer or PWM wire and cannot be speed-controlled by standard motherboard headers. Verify the supply rail matches exactly before ordering.

Highlights

  • Ball bearing rated for continuous operation at 4500-4999 RPM
  • 30-35 CFM airflow keeps components cool under load
  • 24 V 3.6 W input limits power draw
  • 60 x 25 mm frame fits standard 60 mm mounts
  • 35-40 dBA noise level suits quiet builds

Specifications

Series614NGHH
Model614 NGHH
TypeCase Fan
CompatibilityCase
Bearing TypeBall
RPM4500-4999 RPM
Air Flow30-35 CFM
Noise Level35 - 40 dBA
Power Connector2 wires
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions60*60*25mm

Questions about this item

Will the 60 mm frame and 24 V two-wire connector fit the mounting holes and power header on my existing case?

The fan measures 60 mm square by 25 mm thick and uses a bare two-wire lead for 24 V DC, so it matches standard 60 mm mounting patterns and can be soldered or crimped to a compatible header.

How do I confirm the 614NGHH is spinning at the rated 4500 to 4999 RPM after installation?

Connect the fan to a 24 V source, then read the RPM via BIOS hardware monitor or a fan-speed utility; a steady reading between 4500 and 4999 RPM shows the ball-bearing motor is running to spec.

Does the package include mounting screws or a Molex adapter, or must I supply them myself?

The box contains only the 614NGHH axial fan; mounting screws and any 24 V power adapter are not included and must be sourced separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.