We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 60x60x25mm square case fan with two-wire connector

Zyvpee

Zyvpee 614 6025 60x25mm 24V 2.5W 2 Pin case fan

SKU CH-WTWZ-AMHAN

60 × 25 mm ball-bearing case fan running on 24 V at 2.5 W with a 2-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Ball bearing for long service life
  • 24 V 2.5 W DC motor for efficient cooling
  • 60×60×25 mm frame fits 6025 mount
  • Two-pin power connector for simple install
  • Non-LED black design keeps builds clean

60 mm DC square cooler

The Zyvpee 614 is a 60 mm case fan built for 24 V DC systems. It draws 2.5 W through a two-pin connector and uses a ball bearing for continuous operation. The black, non-LED frame fits standard 60 by 60 by 25 mm mounting points in servers or compact enclosures.

Upgrade from sleeve-bearing 60 mm fans

This model replaces older sleeve-bearing units that wear faster in 24 V environments. The ball bearing extends service life when the fan runs at constant speed. The jump is worth it when the existing cooler develops noise or vibration after prolonged duty cycles.

Fits 60 mm mounts with two-pin 24 V headers

The fan needs a 24 V two-pin header and the standard 60 mm square cut-out. It frees up the three- or four-pin headers for PWM-controlled components elsewhere in the build. Ensure the power source delivers 24 V DC before installation.

Highlights

  • Ball bearing for long service life
  • 24 V 2.5 W DC motor for efficient cooling
  • 60×60×25 mm frame fits 6025 mount
  • Two-pin power connector for simple install
  • Non-LED black design keeps builds clean

Specifications

Series614
Model614
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions60*60*25mm

Questions about this item

What screw spacing does the 60 mm square frame need for mounting?

The 60*60*25 mm frame uses the standard 60 mm fan mounting pattern with four corner holes spaced 60 mm centre-to-centre.

How do I connect the 2-pin power lead to a motherboard header?

Align the two-pin plug with the 24 V fan header key and press straight down; reversing the pins will prevent the fan from spinning.

When should the ball-bearing motor be replaced?

Expect the ball-bearing motor to run continuously for years; replace the unit when bearing noise appears or airflow drops below usable levels.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.