We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 120mm square axial fan 25mm thick three wire 24V

Zyvpee

Zyvpee 4414F/2M 120mm 25mm 24V 135mA 3-wire case fan

SKU CH-PYF0-HSW4R

A 120 mm square DC axial cooler with dual ball bearings, 24 V 135 mA power and a three-wire connector for inverter or case airflow

  • TypeCase Fan
  • Bearing Type2 Ball
  • Power Connector3 wires
  • ColorBlack
  • LEDNon-LED
  • FeaturesDC square Cooler
  • 120 mm square frame fits standard 12 cm mounting points
  • 25 mm thickness suits typical case and inverter bays
  • 24 V 135 mA draw matches industrial 24 V rails
  • Dual ball bearing reduces wear in continuous operation
  • Three-wire connector enables speed monitoring and control

Compact 24 V axial fan for industrial chassis

The Zyvpee 4414F/2M is a 120 mm square DC axial cooler built for 24 V systems. Its three-wire lead supplies power and a tachometer signal for speed monitoring. The 25 mm thickness fits standard 120 mm mounting holes in server enclosures, inverter cabinets and telecom racks.

Replaces sleeve-bearing fans that seize

The dual ball bearing withstands higher ambient temperatures and constant rotation without the lubricant migration that shortens sleeve life. The upgrade is justified when the chassis runs 24/7 or when vibration from nearby drives would accelerate wear on a simpler bearing.

Steady airflow at 135 mA draw under sustained load

At the rated 24 V the motor pulls 135 mA, delivering consistent static pressure across the square frame without the current spikes seen at start-up. The non-LED black housing adds no electrical noise, making the unit suitable for sensitive inverter environments where power quality matters.

Highlights

  • 120 mm square frame fits standard 12 cm mounting points
  • 25 mm thickness suits typical case and inverter bays
  • 24 V 135 mA draw matches industrial 24 V rails
  • Dual ball bearing reduces wear in continuous operation
  • Three-wire connector enables speed monitoring and control

Specifications

Series4414F/2M
Model4414F/2M
TypeCase Fan
Bearing Type2 Ball
Power Connector3 wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions120mm*120mm*25mm

Questions about this item

What are the exact mounting dimensions for the Zyvpee 4414F/2M fan?

The fan measures 120mm x 120mm x 25mm and uses standard 120mm mounting holes compatible with typical case fan positions.

How do I connect the three wires on this 24V fan correctly?

Connect the red wire to 24V positive, black to ground, and the third wire to the motherboard or controller tachometer input for speed monitoring.

What maintenance does the dual ball bearing design require over time?

The 2 ball bearings are sealed and lubricated for life; no relubrication is needed, simply clean dust from the blades periodically to maintain airflow.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.