Zyvpee
Zyvpee 3110EL-04W-M66 C01 80mm 25mm 12V .36A 4 Pin case fan
80 mm ball-bearing case fan with a 4-pin PWM connector runs on 12 V at 0.36 A for CPU cooling
- TypeCase Fan
- Bearing TypeBall
- Power Connector4 Pin
- ColorBlack
- LEDNon-LED
- FeaturesCPU Cooling
- Ball bearing for long service life
- 12 V 0.36 A four-pin PWM control
- 80 × 25 mm frame fits standard mounts
- Black non-LED design for clean builds
- 3110EL-04W-M66 C01 series reliability
Zyvpee 3110EL 80 mm case fan
The Zyvpee 3110EL-04W-M66 C01 is an 80 mm square case fan with a 25 mm thickness. It runs on 12 V DC drawing 0.36 A and connects via a four-pin power connector. The black frame carries no LED lighting and uses a ball bearing for rotation.
Suitable for compact builds needing 80 mm cooling
This fan fits chassis and heatsinks designed for the 80 mm by 25 mm form factor. Builds that require a larger frame size, a thinner profile, or a three-pin voltage-control header cannot use this model. It is also not intended for liquid-cooling radiators that demand higher static pressure than a standard case fan provides.
Four-pin PWM control decides compatibility
The four-pin connector enables pulse-width modulation speed control from a compatible motherboard header. If the system only supplies three-pin voltage regulation, the fan will run at full speed without automatic adjustment. Verify the header type before purchasing.
Highlights
- Ball bearing for long service life
- 12 V 0.36 A four-pin PWM control
- 80 × 25 mm frame fits standard mounts
- Black non-LED design for clean builds
- 3110EL-04W-M66 C01 series reliability
Specifications
| Brand | Zyvpee |
|---|---|
| Series | 3110EL-04W-M66 C01 |
| Model | 3110EL-04W-M66 |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Cooling |
| Dimensions | 80*25MM |
Questions about this item
What does the 4-pin connector on this 80 mm fan allow me to control?
The 4-pin connector provides PWM speed control so the motherboard can adjust fan RPM based on temperature.
How much current does the 12 V motor draw and what does that mean for my fan header?
The motor is rated at 0.36 A at 12 V, which is well within the typical 1 A limit of standard motherboard fan headers.
Does the 4-pin PWM interface limit the minimum speed I can set in the BIOS?
PWM control lets the fan spin down to its mechanical minimum, usually a few hundred RPM, without voltage throttling.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



