Zyvpee
Zyvpee 2806KL-04W-B89 C56 70x15mm 3-pin case fan
A 70×15 mm axial fan with ball bearing and 3-pin connector runs at 12 V 0.65 A for HP VP6325 projector cooling
- TypeCPU Cooler Fan
- Bearing TypeBall
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- FeaturesCPU Cooling
- Ball-bearing reliability for long-term cooling
- 70 mm × 15 mm axial design fits tight chassis
- 12 V, 0.65 A draw suits standard fan headers
- Three-pin connector enables speed monitoring
- Direct replacement for HP VP6325 projector cooling
Zyvpee 70 mm axial case fan
The Zyvpee 2806KL-04W-B89 C56 is a 70 by 15 millimetre axial fan built for server and projector cooling. It runs on 12 volt DC power and draws 0.65 amps through a three pin connector. The black frame houses a ball bearing motor and contains no LED lighting.
Suits HP VP6325 projector repairs
This unit fits the HP VP6325 projector and other hardware that accepts a 7015 form factor with three pin power. Builders who need a four pin PWM header, a larger frame size or RGB illumination should look at something else.
Three pin power connector decides compatibility
The 3 pin header delivers fixed 12 volt supply without pulse width modulation control. Verify that the target device provides a matching three pin socket and 12 volt rail before purchase.
Highlights
- Ball-bearing reliability for long-term cooling
- 70 mm × 15 mm axial design fits tight chassis
- 12 V, 0.65 A draw suits standard fan headers
- Three-pin connector enables speed monitoring
- Direct replacement for HP VP6325 projector cooling
Specifications
| Brand | Zyvpee |
|---|---|
| Series | 2806KL-04W-B89 C56 |
| Model | 2806KL-04W-B89 |
| Type | CPU Cooler Fan |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Cooling |
| Dimensions | 70*15MM |
Questions about this item
Will this 12 V 0.65 A fan work on the same motherboard header as my older 12 V case fan?
Yes, both fans use a standard 3-pin 12 V connector, so they can share the same header type; the motherboard will supply 12 V to each and each fan draws its own current.
Does the 70 mm by 15 mm frame fit the mounting holes on my existing 70 mm case fan bracket?
The fan measures 70 mm square with a 15 mm thickness, matching the common 7015 mounting pattern used on many 70 mm brackets.
How can I confirm the ball-bearing fan is spinning correctly after installation?
Check the motherboard BIOS or fan-control software for an RPM reading on the 3-pin header; a steady value above zero means the fan is running.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115349BTC
In stock
