Zyvpee
Zyvpee 2415KL-04W-B79 60x38mm 12V 1.5A 3-pin server case fan
A 60 x 38 mm dual-ball-bearing server case fan running at 12 V and 1.5 A with a 3-pin connector
- TypeCase Fan
- CompatibilityCase
- Bearing Type2 Ball
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Dual-ball bearing reduces friction for longer service life
- 12 V 1.5 A draw fits standard server headers
- 60 × 38 mm frame matches 6 cm mounting holes
- Three-pin connector enables motherboard speed monitoring
- Black non-LED design keeps rack aesthetics clean
Zyvpee 60×38 mm Server Case Fan
This Zyvpee 2415KL-04W-B79 is a 60 mm square, 38 mm thick case fan built for server chassis. It runs on 12 V DC, draws 1.5 A, and connects through a standard three-pin header. The black frame carries no LED lighting.
Who This Suits and Who Should Look Elsewhere
System integrators replacing a failed NMB-spec fan in 1U or blade enclosures will find the exact footprint and dual-ball bearing they need. Buyers who want more airflow than a 60 mm frame can deliver, or who require PWM speed control, should look at larger or four-pin alternatives.
Deciding Specification — 12 V 1.5 A Three-Pin
The 12 V, 1.5 A rating on a three-pin connector is the single figure that determines whether this unit matches the power budget and header layout of the target server tray. Verify that the chassis can supply this current on a three-pin header before ordering.
Highlights
- Dual-ball bearing reduces friction for longer service life
- 12 V 1.5 A draw fits standard server headers
- 60 × 38 mm frame matches 6 cm mounting holes
- Three-pin connector enables motherboard speed monitoring
- Black non-LED design keeps rack aesthetics clean
Specifications
| Series | 2415KL-04W-B79 |
|---|---|
| Model | 2415KL-04W-B79 |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | 2 Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 60*60*38mm |
Questions about this item
How much current does the 12 V motor draw under continuous load?
The fan is rated at 1.5 A on the 12 V rail, so sustained operation will pull that amount.
What noise and heat output should I expect when the fan runs 24/7?
With a dual‑ball bearing and 38 mm thickness the unit moves air steadily; audible noise stays moderate and heat stays low for a 60 mm frame.
Does my chassis need a specific header to power this 3‑pin fan?
A standard 3‑pin 12 V fan header on the motherboard or a compatible fan controller is required for operation.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.0011494BTC
In stock
