Zyvpee
Zyvpee 2410ML-05W-B69 C13 60x25mm 24V 0.17A 3-pin case fan
A 60 mm ball-bearing case fan running at 24 V with a three-pin connector for compact cooling
- Bearing TypeBall
- Power Connector3 Pin
- ColorBeige / Brown
- LEDNon-LED
- FeaturesCPU Cooling Fan
- Dimensions60*25MM
- Ball bearing reduces wear for longer service life
- 24 V 0.17 A draws minimal power from the supply
- 60 × 25 mm frame fits standard 60 mm mounts
- Three-pin connector enables speed monitoring by the board
- Beige finish blends with neutral chassis interiors
Compact 60 mm DC fan for inverter cooling
The Zyvpee 2410ML-05W-B69 C13 is a 60 by 25 mm case fan that runs on 24 V DC at 0.17 A. It uses a three-pin power connector and a ball bearing for continuous airflow in tight chassis spaces.
Verify voltage and connector before purchase
Your system must supply a 24 V DC header or an appropriate converter for the three-pin plug. Confirm that the mounting holes match the 60 mm square pattern and that the beige-brown frame fits the aesthetic of your build.
Fits small-form-factor and converter enclosures
The slim 25 mm profile leaves room for adjacent components while the ball bearing tolerates constant operation. No LED lighting means no extra cabling, and the non-PWM three-pin design keeps wiring simple for basic cooling loops.
Highlights
- Ball bearing reduces wear for longer service life
- 24 V 0.17 A draws minimal power from the supply
- 60 × 25 mm frame fits standard 60 mm mounts
- Three-pin connector enables speed monitoring by the board
- Beige finish blends with neutral chassis interiors
Specifications
| Brand | Zyvpee |
|---|---|
| Series | 2410ML-05W-B69 C13 |
| Model | 2410ML-05W-B69 |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | Beige / Brown |
| LED | Non-LED |
| Features | CPU Cooling Fan |
| Dimensions | 60*25MM |
Questions about this item
Does the 60 mm fan ship with any mounting screws or a power adapter, or do those need to be sourced separately?
The listing shows only the 60x25 mm fan with a 3-pin connector; screws, adapters or cables are not included and must be purchased separately.
The model 2410ML-05W-B69 C13 is the only version listed — how do I confirm it matches my 24 V system?
The fan is rated for DC 24 V at 0.17 A with a 3-pin connector, so it fits any 24 V header or supply that provides a standard 3-pin fan connection.
What does the 0.17 A current draw mean for noise and airflow once the fan is installed in a chassis?
At 0.17 A on 24 V the fan consumes about 4 W, a level typical for low-speed ball-bearing units that prioritise quiet operation over maximum airflow.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114365BTC
In stock
