We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 60x25mm axial case fan with three wires

Zyvpee

Zyvpee 2410ML-05W-B59 60x25mm 24V 0.13A 3-wire case fan

SKU CH-05T0-7YGYT

A 60 × 25 mm axial fan with dual ball bearings and a three-wire 24 V connection for inverter or server cooling

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • Power Connector3 wires
  • ColorBlack
  • LEDNon-LED
  • Dual-ball bearing extends service life
  • 24 V 0.13 A three-wire power input
  • Compact 60 x 60 x 25 mm frame fits tight spaces
  • Non-LED black design keeps builds clean
  • Designed for inverter UPS switch server DIY

Zyvpee 24V 60mm axial fan

This Zyvpee 2410ML-05W-B59 is a 60 by 25 millimetre DC axial fan built for case cooling. It runs on 24 volts and draws zero point one three amps through a three-wire power connector. The unit uses a two-ball bearing and has no LED lighting. It suits servers, inverters, UPS units, switches and DIY projects that need a compact 24 volt airflow source.

Replaces worn 24V three-wire fans

Swap this in when an existing 60 by 25 millimetre 24 volt fan with a three-wire lead has become noisy or has stopped spinning. The two-ball bearing offers longer service life than sleeve alternatives in continuous-duty gear such as inverter enclosures or network switches. The jump is worth it when the original fan matches the voltage, current and connector but the bearing has worn out.

Check voltage connector and mounting holes

Verify that your equipment supplies 24 volts DC and accepts a three-wire plug before ordering. Confirm the chassis has 60 millimetre square mounting points with 25 millimetre depth clearance. Ensure the zero point one three amp draw fits the power budget of the fan header or supply rail. Buyers who need PWM speed control or a four-pin connector cannot use this model.

Highlights

  • Dual-ball bearing extends service life
  • 24 V 0.13 A three-wire power input
  • Compact 60 x 60 x 25 mm frame fits tight spaces
  • Non-LED black design keeps builds clean
  • Designed for inverter UPS switch server DIY

Specifications

Series2410ML-05W-B59
Model2410ML-05W-B59
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
Power Connector3 wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions60*60*25mm

Questions about this item

What are the exact mounting dimensions for the 60x25mm Zyvpee 2410ML-05W-B59 fan?

The fan measures 60mm by 60mm with a 25mm thickness and uses standard 60mm mounting holes.

How do I connect the three wires on this 24V 0.13A fan and which step is often missed?

Connect the red wire to 24V, black to ground, and the third wire to the tachometer header; the step often missed is wiring the signal wire for speed monitoring.

When should I replace the 2 ball bearings in this 2410ML-05W-B59 axial fan?

Replace the fan when bearing noise becomes audible or if the rotor stops spinning freely, as the 2 ball bearings are not user-serviceable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.