We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 80x25mm 24V 3-wire inverter case fan

Zyvpee

Zyvpee 08025SS-24P-AL 80x25mm 24V .17A 3-Wire Inverter Case Fan

SKU CH-S2F7-2FT1Z

An 80 by 25 millimetre case fan with ball bearing and three-wire 24 volt .17 amp power for inverter cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Wires
  • ColorBlack
  • LEDNon-LED
  • FeaturesInverter Cooling Fan
  • Ball-bearing design extends operational life
  • 24 V 0.17 A rating keeps power draw low
  • 80 × 25 mm frame fits standard 80 mm mounts
  • Three-wire connector enables speed monitoring
  • Non-LED black finish suits low-profile builds

Zyvpee 80mm 24V Inverter Fan

The Zyvpee 08025SS-24P-AL is an 80 by 25 millimetre case fan designed for inverter cooling. It runs on 24 volts and draws 0.17 amps through a three-wire power connector. The ball bearing and black non-LED frame suit industrial or server chassis that need steady airflow.

Suits 24 volt three-wire headers

Builders with a 24 volt three-wire header and an 80 millimetre mounting pattern can install this fan directly. It is not for systems that supply a different voltage, use a four-pin connector, or require a larger frame than 80 by 25 millimetres.

24 volt 0.17 amp three-wire spec

The 24 volt 0.17 amp rating on a three-wire connector is the single figure that decides fit. If the header voltage or pin count differs the fan will not operate. Match those numbers before ordering.

Highlights

  • Ball-bearing design extends operational life
  • 24 V 0.17 A rating keeps power draw low
  • 80 × 25 mm frame fits standard 80 mm mounts
  • Three-wire connector enables speed monitoring
  • Non-LED black finish suits low-profile builds

Specifications

BrandZyvpee
Series08025SS-24P-AL
Model08025SS-24P-AL
TypeCase Fan
Bearing TypeBall
Power Connector3 Wires
ColorBlack
LEDNon-LED
FeaturesInverter Cooling Fan
Dimensions80*25mm

Questions about this item

Will the 80mm frame and 25mm thickness fit the same mounting holes as my existing 8025 fan?

Yes — the 80 by 25 mm dimensions match the standard 8025 mounting pattern, so it aligns with the four screw holes used by most 80 mm case fans.

How can I confirm the 3-wire tachometer signal is reporting speed correctly after installation?

Connect the fan to a 24 V header, then check the RPM reading in BIOS or a hardware-monitoring utility; a steady value that changes with load shows the tach wire is working.

Does the box include mounting screws or a 3-pin to 4-pin adapter, or must I source them separately?

The package contains only the fan unit itself; mounting screws and any connector adapters are not included and must be purchased separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.