We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver galvanized 45-degree street elbow with male and female threaded ends

Zoro Select

Zoro Select 811027002 3/8" Galvanized 45° Street Elbow bathware

SKU CH-BGJD-0GD3Y

Connects 3/8" threaded pipe at a 45-degree angle with galvanized malleable iron rated for 300 psi at 150 °F

  • ColorSilver
  • TypePipes, Valves & Fittings
  • Galvanised malleable iron resists corrosion in wet environments
  • 45° street elbow connects 3/8 in female to male NPT threads
  • Class 150 rating suits Schedule 40 piping systems
  • 300 psi at 150 °F maximum operating pressure
  • Silver finish identifies galvanised coating at a glance

Zoro Select 811027002 3/8" Galvanized Elbow

This new Zoro Select street elbow connects a 3/8 inch female NPT thread to a 3/8 inch male NPT thread at a 45 degree angle. It is made from malleable iron with a galvanized silver finish for corrosion resistance. The fitting is rated for Schedule 40 pipe and Class 150 service. It suits residential and light commercial plumbing installations.

For threaded pipe connections needing a 45 degree

This elbow suits installers joining male and female threaded pipe ends in water, air, or gas lines within the 300 psi pressure rating at 150 degrees F. It is not for systems exceeding that pressure or temperature, for pipes larger than 3/8 inch, or for applications requiring non-threaded joint types such as solder, compression, or push-fit connections.

Rated 300 psi at 150 degrees F maximum operating

This single pressure and temperature limit determines whether the fitting is safe for the intended service. Verify that the system design pressure and fluid temperature stay at or below these values before installation. The Class 150 and Schedule 40 designations confirm the fitting matches standard iron pipe dimensions for that class.

Highlights

  • Galvanised malleable iron resists corrosion in wet environments
  • 45° street elbow connects 3/8 in female to male NPT threads
  • Class 150 rating suits Schedule 40 piping systems
  • 300 psi at 150 °F maximum operating pressure
  • Silver finish identifies galvanised coating at a glance

Specifications

BrandZORO SELECT
ColorSilver
TypePipes, Valves & Fittings

Questions about this item

What pipe schedule must my existing 3/8" piping be to match this Schedule 40 elbow?

Your piping must be Schedule 40 to match the elbow's rated schedule.

Will the 3/8" male and female NPT threads connect to older galvanized fittings of the same nominal size?

Yes, the 3/8" FNPT and MNPT threads follow standard NPT dimensions for galvanized pipe.

How can I confirm the joint holds pressure after installation?

Pressurise the system up to 300 psi at 150 °F and check for leaks at the threaded connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.