Scosche
Scosche 8" PRO Midbass Driver 200W RMS 400W Peak 60-8000Hz 97dB 4Ω 3.75" Depth
An 8-inch midbass driver handling 200 W RMS with a 60-8,000 Hz range, 97 dB sensitivity, 4 Ω impedance and a 3.75-inch mounting depth
- 200 W RMS power handling for clean output
- 400 W peak capacity handles dynamic transients
- 97 dB sensitivity produces high volume with less power
- 60–8 000 Hz range covers deep midbass to upper midrange
- 75 in mounting depth fits shallow enclosures
8" PRO Midbass Driver for Car Audio
The Scosche 8" PRO Series Midbass driver delivers 200 watts RMS and 400 watts peak power handling for vehicle sound systems. Its 4 ohm impedance matches standard car amplifiers. The driver covers a frequency response of 60 to 8000 Hz with 97dB sensitivity for efficient output.
Die-Cast Aluminium Housing with 3.75" Mounting Depth
A high-density die-cast aluminium frame provides rigid mounting and reduces resonance. The top-mount depth of 3.75 inches fits many factory and aftermarket door locations. Flush-mount design integrates cleanly into interior panels without protruding hardware.
Polypropylene Cone and 2" Voice Coil for Thermal
The polypropylene treated hybrid paper cone with woven cloth ribbon surround resists heat buildup during extended play. A lightweight aluminium voice coil former and 2" copper-clad aluminium voice coil dissipate power efficiently. This construction maintains consistent performance at high volumes without mechanical noise.
Highlights
- 200 W RMS power handling for clean output
- 400 W peak capacity handles dynamic transients
- 97 dB sensitivity produces high volume with less power
- 60–8 000 Hz range covers deep midbass to upper midrange
- 75 in mounting depth fits shallow enclosures
Specifications
| Brand | Scosche |
|---|
Questions about this item
What impedance does the 8" PRO midbass driver present, and what amplifier power does that limit in practice?
The driver is rated at 4 ohms impedance and handles 200 watts RMS continuous power with a 400-watt peak rating, so an amplifier stable into 4 ohms at around 200 watts per channel will drive it cleanly without clipping.
How much clearance behind the mounting surface does the 8" PRO midbass driver require?
The top-mount depth is 3.75 inches, so the mounting cavity must provide at least that much clear space behind the baffle for the die-cast aluminum housing and magnet structure.
What is the correct wiring sequence when installing the 8" PRO midbass driver to avoid phase cancellation?
Connect the amplifier positive terminal to the driver positive terminal and negative to negative; reversing them inverts polarity and causes phase cancellation with other drivers in the system.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
