Zoro Select
Zoro Select 4316010562 Elbow 90 deg 1-1/2 In 300 gal bathware
A 90-degree transparent elbow fitting for 1-1/2 inch pipes rated to 300 gallons
- ColorTransparent
- TypePipes, Valves & Fittings
- 90-degree elbow redirects flow in tight bathware layouts
- 1-1/2 inch size fits standard plumbing connections
- 300-gallon rating supports high-volume bath installations
- Transparent body allows visual inspection of flow
- Zoro Select brand built for professional bathware applications
Zoro Select 90-Degree Elbow Fitting
The Zoro Select 4316010562 is a transparent 90-degree elbow designed for bathware piping systems. It connects 1-1/2 inch pipes and suits residential or light commercial drainage installations. The fitting is supplied new and listed under the Pipes, Valves & Fittings category. It addresses the need for a secure directional change in standard bath plumbing layouts.
Transparent Material and Flow Capacity
The transparent body allows visual confirmation of flow and blockage during normal use. Rated for 300 gal capacity, it handles typical bathwater discharge without restriction. No moving parts or seals are present, so operational noise and power draw are not applicable. The simple moulded construction supports reliable gravity-fed drainage performance.
1-1/2 Inch Connection Specification
The single decisive specification is the 1-1/2 inch connection size, which must match the existing pipework exactly. Builders who need a different diameter or a non-90-degree angle cannot use this fitting. It is not intended for pressurised supply lines or chemical waste systems beyond standard bathwater drainage.
Highlights
- 90-degree elbow redirects flow in tight bathware layouts
- 1-1/2 inch size fits standard plumbing connections
- 300-gallon rating supports high-volume bath installations
- Transparent body allows visual inspection of flow
- Zoro Select brand built for professional bathware applications
Specifications
| Brand | ZORO SELECT |
|---|---|
| Color | Transparent |
| Type | Pipes, Valves & Fittings |
Questions about this item
How do you install the 1-1/2 inch elbow without leaks?
Apply solvent cement evenly to both the pipe end and the fitting socket, then insert with a quarter turn and hold for 30 seconds; skipping the turn leaves a weak joint.
What maintenance does the transparent fitting require over time?
Inspect annually for stress cracks or discolouration; replace the elbow if the material clouds or shows hairline fractures near the 90 degree bend.
At what flow does the 300 gallon rating become a limit?
The 300 gal rating marks the maximum tested capacity; sustained flow above that level increases pressure loss and risks joint failure at the bend.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



