We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized malleable iron 45 degree street elbow with threaded ends

Zoro Select

Zoro Select 1/4" FNPT x MNPT Galvanized 45 Deg Street Elbow 811026616

SKU CH-CDG7-ZTQQ1

A galvanized malleable iron street elbow with 1/4" FNPT x MNPT threads, rated 300 psi at 150°F for Schedule 40 pipe

  • ColorSilver
  • TypePipes, Valves & Fittings
  • 45° street elbow routes pipe around tight corners
  • Galvanised malleable iron resists corrosion in wet systems
  • Class 150 rating handles 300 psi at 150 °F
  • Schedule 40 threads seal on standard 1/4" NPT pipe
  • Female-to-male ends connect directly without extra couplings

Zoro Select 45° Street Elbow

The Zoro Select 1/4" FNPT x MNPT galvanized street elbow connects a female-threaded pipe to a male-threaded fitting at a forty-five degree angle. It is built from malleable iron with a galvanized finish for corrosion resistance in plumbing installations. This fitting suits residential and light-commercial water, air or gas lines where a directional change is required.

Class 150 Schedule 40 Rating

The elbow meets Class 150 standards for Schedule 40 pipe, providing a maximum operating pressure of 300 psi at 150 degrees Fahrenheit. This single pressure-temperature rating determines whether the fitting matches the system design. Verify the service conditions against these limits before installation.

1/4 Inch Threaded Capacity

The 1/4 inch female and male NPT threads handle typical small-bore distribution branches with comfortable headroom for standard pressure drops. The galvanized malleable iron body resists internal scaling and external moisture in normal service. It is not suited for high-volume mains or systems exceeding the rated pressure and temperature envelope.

Highlights

  • 45° street elbow routes pipe around tight corners
  • Galvanised malleable iron resists corrosion in wet systems
  • Class 150 rating handles 300 psi at 150 °F
  • Schedule 40 threads seal on standard 1/4" NPT pipe
  • Female-to-male ends connect directly without extra couplings

Specifications

BrandZORO SELECT
ColorSilver
TypePipes, Valves & Fittings

Questions about this item

How does the 300 psi rating at 150 °F translate to everyday plumbing use?

The fitting is rated for up to 300 psi at 150 °F, so it can handle typical residential water pressure and hot-water lines within those limits.

What does the 1/4" FNPT x MNPT threaded connection mean for compatibility?

One end has a 1/4 inch female NPT thread and the other a 1/4 inch male NPT thread, allowing a direct 45-degree turn between matching NPT pipes or fittings.

What clearance is needed to install the 45-degree street elbow?

The galvanized malleable iron body follows a standard 45-degree street-elbow profile, so allow enough space for the male thread to engage fully and the female side to accept the adjoining pipe.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.