We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Zacuto

Zacuto LANC Extension Cable 13.8" 2.5 mm Right-Angle 24 AWG

SKU CH-Q5QY-GZAXD

Extends LANC control up to 13.8" with a right-angle 2.5 mm connector and 24 AWG wire for reliable remote operation

  • Extends LANC control up to 13.8 inches for flexible camera positioning
  • Right-angle 2.5 mm mini jack reduces strain on camera ports during operation
  • Heavy-duty 24 AWG wire with UL approval ensures reliable signal transmission
  • Maintains full LANC functionality for precise start/stop and zoom control
  • Compatible with 2.5 mm LANC devices including Zacuto FS700 Grip Relocator

Extended LANC control

The Zacuto LANC Extension Cable adds 13.8 inches of reach between a LANC controller and a compatible camera. It is intended for videographers who need to operate start, stop and zoom functions from a grip or handle positioned away from the camera body. The right-angle 2.5 mm mini jack reduces strain on the camera port during handheld or rigged shooting. Professional and enthusiast users gain extra cable length without signal degradation.

Right-angle 2.5 mm connector

The cable terminates in a right-angle 2.5 mm male plug on one end and a 2.5 mm female socket on the other, preserving full LANC protocol operation. This specific orientation keeps the cable running parallel to the camera side, which is the deciding factor when clearance around the port is tight. The 24 AWG conductors and UL-approved construction maintain reliable communication over the 0.35 m span. Buyers whose equipment uses a different jack size or straight-entry requirement cannot use this cable.

Simple plug-and-play

Installation requires only inserting the male plug into the camera LANC port and connecting the existing controller to the female end; no drivers or configuration are needed. The right-angle moulding can interfere with adjacent ports on some camera bodies, so verify physical clearance before mounting. The 24 AWG wire is flexible but not rated for continuous high-flex drag-chain use, so avoid routing it through tight moving cable tracks. Users needing longer runs should look for active extension solutions instead.

Highlights

  • Extends LANC control up to 13.8 inches for flexible camera positioning
  • Right-angle 2.5 mm mini jack reduces strain on camera ports during operation
  • Heavy-duty 24 AWG wire with UL approval ensures reliable signal transmission
  • Maintains full LANC functionality for precise start/stop and zoom control
  • Compatible with 2.5 mm LANC devices including Zacuto FS700 Grip Relocator

Specifications

No published specifications for this item yet.

Questions about this item

How much extra reach does the 13.8" cable add when used with a Zacuto FS700 Grip Relocator?

It extends LANC control by 13.8 inches (0.35 m), letting you position the grip relocator further from the camera body for more comfortable operation.

What does the 2.5 mm male-to-female LANC connector actually limit in practice?

The 2.5 mm jack carries the LANC protocol for start/stop recording and zoom control; it does not transmit video, audio or power, so the cable only extends remote lens functions.

Will the right-angle 2.5 mm plug and 24 AWG wire fit cleanly into a crowded camera cage?

The right-angle mini jack reduces strain and clears tight spaces, while the 24 AWG UL-approved wire is thin enough to route alongside other cables without blocking adjacent ports.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.