We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact SFP+ transceiver with RJ45 port, zinc alloy shell, 30m reach

YunvoFib SFP+-T30 10GBASE-T SFP+ to RJ45 Transceiver 30m

SKU CH-1G1X-79232

A 10GBASE-T SFP+ copper transceiver delivering 2.5G, 5G or 10G auto-negotiated speeds over Cat6a or Cat7 cable up to 30 metres

  • Color10GBase-T-10G-30M
  • Cable Length30Meters
  • Dimensions1.905 cm x 6.096 cm x 10.0076 cm
  • Weight0.041 kilograms
  • Supports 10G, 5G and 2.5G speeds with auto-negotiation
  • Hot-swappable plug-and-play module installs without reboot
  • Low-power 2.3W chip with zinc alloy shell for heat dissipation
  • Reaches 30 metres over Cat6a or Cat7 copper cabling
  • IEEE 802.3 compliant and tested with Cisco and Mikrotik switches

YunvoFib SFP+-T30 10GBASE-T Transceiver

This YunvoFib SFP+-T30 module converts an SFP+ port to a 10GBASE-T RJ45 connection. It supports 2.5G, 5G and 10G data rates with auto-negotiation for enterprise LANs, servers and NAS systems. The hot-swappable design allows installation without rebooting the host device.

Low-power chip at 2.3W with zinc alloy shell

The transceiver uses an advanced low-power chip rated at 2.3W and a zinc alloy housing for heat dissipation. It operates from 0 to 70°C (32 to 158°F) without active cooling. The efficient thermal design maintains stable performance during continuous operation.

30-metre reach over Cat6a or Cat7 copper

Maximum transmission distance is 30 metres (98 feet) when using Cat6a or Cat7 cabling. This length suits in-rack or cross-rack server deployments and small data-centre links. Longer copper runs require a different module specification.

Highlights

  • Supports 10G, 5G and 2.5G speeds with auto-negotiation
  • Hot-swappable plug-and-play module installs without reboot
  • Low-power 2.3W chip with zinc alloy shell for heat dissipation
  • Reaches 30 metres over Cat6a or Cat7 copper cabling
  • IEEE 802.3 compliant and tested with Cisco and Mikrotik switches

Specifications

BrandYunvoFib
ModelSFP+-T30
Part NumberXC-SFP+-T-10G-30M
Color10GBase-T-10G-30M
Cable Length30Meters
Dimensions1.905 cm x 6.096 cm x 10.0076 cm
Weight0.041 kilograms

Questions about this item

How do I install the YunvoFib SFP+-T30 module and what step is often missed?

Insert the transceiver into an SFP+ port until it clicks, then connect a Cat6a or Cat7 patch cord to the RJ45 jack; the step often missed is verifying the switch port is configured for 10GBASE-T copper rather than fibre.

What maintenance or replacement will the YunvoFib SFP+-T30 need over time?

The module itself has no user-serviceable parts; if a link degrades, first re-seat the transceiver and inspect the Cat6a or Cat7 cable for kinks or damaged connectors before considering a replacement unit.

What is the first limit that appears when the YunvoFib SFP+-T30 runs under sustained 10 Gb/s load?

The 30-metre reach over Cat6a or Cat7 cable is the primary constraint; beyond that distance signal integrity drops, so the link cannot be extended without moving to a longer-range transceiver or fibre.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.